1 Topic by Flyboy55

  • Flyboy55
  • Member
  • Offline
  • Registered: 2015-02-28
  • Posts: 20

Topic: Broke wires to calibration pin

I was working in clearing a clog tonight on a old 1.0 I bought from a salvage shop. I accidentally cut the wires that go to the small calibration pin on the brass hothead. Is there any fix for this? 

Thanks for your time.

Check out my YouTube channel: https://www.youtube.com/user/icanthinkofanid

2 Reply by carl_m1968 (edited by carl_m1968 2015-02-28 08:16:10)

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Broke wires to calibration pin

Flyboy55 wrote:

I was working in clearing a clog tonight on a old 1.0 I bought from a salvage shop. I accidentally cut the wires that go to the small calibration pin on the brass hothead. Is there any fix for this? 

Thanks for your time.


Those wires don't go to the pin, they go to the thermistor. You can get a new thermistor on ebay, but you will have to do the wiring yourself as they don't come with the necessary connector. otherwise you will have to replace the head through XYZprinting. Or talk to one of the guys here who is parting theirs and see if they will give you a good deal of the head.

http://www.soliforum.com/topic/10151/se … nci-parts/

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.