1 Topic by moo10032

  • moo10032
  • Newbie
  • Offline
  • Registered: 2015-02-22
  • Posts: 7

Topic: Selling extra Da Vinci parts

I'm selling off several parts from 2 generations of Da Vinci printers.

2x Main Controller boards:
1 - The old generation one with the 4 big motor drivers was no longer able to write to the SD card (I attempted to solder a new SD card reader in but with no effect) It has a non-stock firmware flashed to it right now, use it for parts.
2 - The newer generation board with the microsd card has never been turned on so I cannot confirm if it works or not. Visually no damage, should work, no guarantees.

2x Power Supplies, one was never turned on but was from a new unit so it should work, the other works fine but I spliced into the 12v lines, no issues though.

2x LCD control panels, one never turned on but from a new unit both should work fine. LCD ribbon cords also.

2x LED strips.

2x Extruder assembly, one has all the stock items installed like thermistor, heater, small chip board, the other one has no thermistor but has the heater element, and disassembled chip board.

Few other misc things like the optical limit switches 4x, cartridge chip reader, screws.

I have images but I can't post links for some reason.

Any offers please let me know! Ships from Minnesota USA.

2 Reply by montressor

  • montressor
  • montressor
  • Member
  • Offline
  • Registered: 2014-12-17
  • Posts: 105

Re: Selling extra Da Vinci parts

I assume these are all for a Davinci 1? If you have any Duo Extruder Assemblies I'd be interested

Davinci Duo, Repetier 0.92, OctoPi

3 Reply by moo10032

  • moo10032
  • Newbie
  • Offline
  • Registered: 2015-02-22
  • Posts: 7

Re: Selling extra Da Vinci parts

Yeah its the 1.0 one.

4 Reply by Flyboy55

  • Flyboy55
  • Member
  • Offline
  • Registered: 2015-02-28
  • Posts: 20

Re: Selling extra Da Vinci parts

I sent you an email through the forums. I need an extruder assymbly for a 1.0

Check out my YouTube channel: https://www.youtube.com/user/icanthinkofanid

5 Reply by thecure

  • thecure
  • Member
  • Offline
  • Registered: 2014-10-20
  • Posts: 28

Re: Selling extra Da Vinci parts

do you have the complete z axis for sale, minus the glass & heater?

6 Reply by milehighdesign (edited by milehighdesign 2015-05-10 02:59:01)

  • milehighdesign
  • Member
  • Offline
  • Registered: 2015-02-01
  • Posts: 15

Re: Selling extra Da Vinci parts

Hi,
I need the The newer generation board 1.0A. and the Extruder assembly small chip board.
How much for those? Would $75 plus shipping be enough? Let me know. I need to get back up and printing ASAP.
Thanks,
Nathan

7 Reply by lachupacabra

  • lachupacabra
  • Member
  • Offline
  • Registered: 2014-08-16
  • Posts: 40

Re: Selling extra Da Vinci parts

Hi,

I have the motherboard from 1.0A (newer version with J37 jumper) and a small pcb for sale.
Anybody interested, let me know!

Davinci 1.0&1.0A with repetier 0.92 firmware & E3D bowden
Slicer - Simplify3d/CraftWare/MatterControl/Repetier Host
Filament - ABS, PLA, FPE, LayWood
3D modelling - Autodesk 3DS Max, Blender,

8 Reply by buldogg77

  • buldogg77
  • Newbie
  • Offline
  • Registered: 2015-05-12
  • Posts: 4

Re: Selling extra Da Vinci parts

I too am in need of a 1.0a board please let me know if anyone has one they would sell

9 Reply by qtoppa

  • qtoppa
  • Member
  • Offline
  • Registered: 2014-01-06
  • Posts: 30

Re: Selling extra Da Vinci parts

I have the small pcb board and extruder assembly for sale.  The thermosister is attached still but wires are cut.

10 Reply by raptor700yfz

  • raptor700yfz
  • Member
  • Offline
  • Registered: 2015-08-19
  • Posts: 15

Re: Selling extra Da Vinci parts

Do you still have a full extruder assembly?

11 Reply by davdjmor

  • davdjmor
  • Newbie
  • Offline
  • Registered: 2015-08-18
  • Posts: 5

Re: Selling extra Da Vinci parts

I am looking for the firmware 1.1.3 from the SD card of an aio that has not been upgraded, do any of these boards that are for sale come from an aio that has not been upgraded? In a nutshell, I'll buy a board as long as it has 1.1.3 for the aio on it.

12 Reply by wordoftheday

  • wordoftheday
  • Member
  • Offline
  • Registered: 2014-12-27
  • Posts: 14

Re: Selling extra Da Vinci parts

Looking for the Z axis sensor if you have it.

13 Reply by techgeek

  • techgeek
  • Newbie
  • Offline
  • Registered: 2016-01-05
  • Posts: 3

Re: Selling extra Da Vinci parts

I'm looking for the LED bar(s) if those are still laying around...