1 Topic by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Topic: How do I correct this in slicer? Pic attached

Hi I am using repetier firmware and repetier host with slicer on a davinci 1.0
What setting do I change to correct this in the picture?
This print does not come out as good as my stock xyz software and firm ware.
I know its just a slicer setting but not sure which one.  thanks

Post's attachments

DSC00798.JPG 2.1 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by lueman

  • lueman
  • lueman
  • Member
  • Offline
  • Registered: 2014-05-28
  • Posts: 97

Re: How do I correct this in slicer? Pic attached

Try using a higher resolution such as .2, also looks like your temp is a little low, for fine details you need the filament flowing smoothly. I wouldn't change the flow rate until you get temperature dialed in.

SD4 with E3D V6.

Those who don't know ask, those who don't care comment,  those who comment without answers  hide ignorance for fear of asking. Be fearless!

3 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: How do I correct this in slicer? Pic attached

Bump your minimum perimeters up to 3 or 4. Based on your extruder size, it can not fill in those small areas so you will need to cheat by having the perimeters back fill in to that area by making more of them where is can. If an area such as the space between that border and the letter is smaller than your nozzle size which is .40 on this printer there is a chance it may not fill in some areas that are smaller. That's why they sell heads with nozzles as small as .20 to get better infill in small areas and parts. But those smaller nozzles will double and triple your print time.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

4 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: How do I correct this in slicer? Pic attached

Wondering why my stock davinci 1.0 printed the item in the pic with no problems , Vs. the new pico b3 head has the problem in the pic?