https://www.soliforum.com/topic/9953/how-do-i-correct-this-in-slicer-pic-attached/ Wed, 18 Feb 2015 21:05:08 +0000 PunBB https://www.soliforum.com/post/86005/#p86005 Wondering why my stock davinci 1.0 printed the item in the pic with no problems , Vs. the new pico b3 head has the problem in the pic?

]]> Wed, 18 Feb 2015 21:05:08 +0000 https://www.soliforum.com/post/86005/#p86005 https://www.soliforum.com/post/85422/#p85422 Bump your minimum perimeters up to 3 or 4. Based on your extruder size, it can not fill in those small areas so you will need to cheat by having the perimeters back fill in to that area by making more of them where is can. If an area such as the space between that border and the letter is smaller than your nozzle size which is .40 on this printer there is a chance it may not fill in some areas that are smaller. That's why they sell heads with nozzles as small as .20 to get better infill in small areas and parts. But those smaller nozzles will double and triple your print time.

]]> Sun, 15 Feb 2015 23:45:52 +0000 https://www.soliforum.com/post/85422/#p85422 https://www.soliforum.com/post/85358/#p85358 Try using a higher resolution such as .2, also looks like your temp is a little low, for fine details you need the filament flowing smoothly. I wouldn't change the flow rate until you get temperature dialed in.

]]> Sun, 15 Feb 2015 15:35:20 +0000 https://www.soliforum.com/post/85358/#p85358 https://www.soliforum.com/post/85223/#p85223 Hi I am using repetier firmware and repetier host with slicer on a davinci 1.0
What setting do I change to correct this in the picture?
This print does not come out as good as my stock xyz software and firm ware.
I know its just a slicer setting but not sure which one.  thanks

]]> Sat, 14 Feb 2015 12:36:25 +0000 https://www.soliforum.com/post/85223/#p85223