1 Topic by Heartlander (edited by Heartlander 2015-02-11 03:05:23)

  • Heartlander
  • Heartlander
  • Member
  • Offline
  • From: Kent from Kansas City
  • Registered: 2013-06-23
  • Posts: 904

Topic: API problem when trying to print

Hi guys. Trying to restart my SD3 after almost a year and a half.  The same machine was running fine when I last printed. Good STL file, Windows 8 with all updates.

When I Print, it moves the bed and extruder around then, before laying any filament down blows the error (Attached). Ideas? THanks.

Post's attachments

sd error.JPG 47.01 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.
Robox printer, HICTOP (Prusa i3 variant) Model 3DP17 printer, ELEK 2.5W laser engraver, AutoDesk 123D Design, Windows 10

Heartlander's Website

2 Reply by Heartlander

  • Heartlander
  • Heartlander
  • Member
  • Offline
  • From: Kent from Kansas City
  • Registered: 2013-06-23
  • Posts: 904

Re: API problem when trying to print

Okay, I failed to include the error msg originally, it;s attached now. Sorry and thanks for your time and help.

Robox printer, HICTOP (Prusa i3 variant) Model 3DP17 printer, ELEK 2.5W laser engraver, AutoDesk 123D Design, Windows 10

Heartlander's Website

3 Reply by IronMan

  • IronMan
  • IronMan
  • PRINTiT
  • Offline
  • From: SC
  • Registered: 2012-09-14
  • Posts: 1,269

Re: API problem when trying to print

Seems like it's trying to play a sound?  Do you have a code like this anywhere:

M300: Play beep sound
Usage: M300 S<frequency Hz> P<duration ms>
Example: M300 S300 P1000
Play beep sound, use to notify important events like the end of printing. See working example on R2C2 electronics. Also supported by duet-dc42 firmware via the sounder on the add-on touch screen control panel.

SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!

4 Reply by Heartlander

  • Heartlander
  • Heartlander
  • Member
  • Offline
  • From: Kent from Kansas City
  • Registered: 2013-06-23
  • Posts: 904

Re: API problem when trying to print

Okay, I Repaired the drawing in Autodesk's Meshmixer and sliced it in Slic3r and now it is printing. Annoying because I don't understand what went wrong, but anyway. Thanks for the help Iron Man.

Robox printer, HICTOP (Prusa i3 variant) Model 3DP17 printer, ELEK 2.5W laser engraver, AutoDesk 123D Design, Windows 10

Heartlander's Website

5 Reply by IronMan

  • IronMan
  • IronMan
  • PRINTiT
  • Offline
  • From: SC
  • Registered: 2012-09-14
  • Posts: 1,269

Re: API problem when trying to print

It don't make no sense...but if it works, it works! big_smile

SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!