1 Topic by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Topic: Park settings in repetier host?

HI anyone know the numbers to set the park settings at in repetier host?

2 Reply by satman49

  • satman49
  • Member
  • Offline
  • From: virginia
  • Registered: 2012-12-28
  • Posts: 867

Re: Park settings in repetier host?

I choose back right area, like X175 Y175 Z 5

SD3, E3D hotend,linear bearing on x/y axis',pillow block bearing on y conneting rod, ball bearngs on front y axis, fan on y stepper motor.

3 Reply by carl_m1968 (edited by carl_m1968 2015-01-26 18:12:02)

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Park settings in repetier host?

hansen644 wrote:

HI anyone know the numbers to set the park settings at in repetier host?

Could you point me to this PARK setting you keep asking about? I have looked at my EEPROM setting and PRINTER settings and I do not see a PARK reference anywhere. I see HOME and max. length for the three AXIS but no PARK. As I said in the other thread PARK is a misused term and not really to my knowledge used in 3D printing.

I know I used the term once but I was trying to explain the difference from where the head sits at over the drip tray versus HOME which is where the printer actually begins the print. Which varies with printer designs. In the case of the Da Vinci HOME is above the drip tray so I may have confused you with that and I am sorry. Most printers don't have a drip tray and so home is usually set as a point just off of the print bed at a corner.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

4 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: Park settings in repetier host?

The park setting are under printer settings it says park position.   Any one know how to make the head move slow from the park position to home position? Mine moves much to quick for my liking

5 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: Park settings in repetier host?

175 175 and 5 setting are way off for mine. it makes my head bang the side of the bed.  I guess I will keep trying different numbers

6 Reply by satman49

  • satman49
  • Member
  • Offline
  • From: virginia
  • Registered: 2012-12-28
  • Posts: 867

Re: Park settings in repetier host?

On a side note:if you have not done so  in RH config/preferences  check " Disable Quality Reduction"

SD3, E3D hotend,linear bearing on x/y axis',pillow block bearing on y conneting rod, ball bearngs on front y axis, fan on y stepper motor.

7 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: Park settings in repetier host?

what does that do?

8 Reply by carl_m1968 (edited by carl_m1968 2015-01-27 03:24:39)

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Park settings in repetier host?

hansen644 wrote:

what does that do?

For older computers or video cards they have an issue rendering the video real time of print progress and the 3D model. That settings reduces the video quality so it is not as hard on older cards or computers. It has nothing to do with your actual print or printer. If it is checked then it will use all the video resources it can towards rendering the 3d model in the host as well as rel time tool path tracking.

Not real sure why he mentioned it in this thread.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

9 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Park settings in repetier host?

175 175 and 5 setting are way off for mine. it makes my head bang the side of the bed.  I guess I will keep trying different numbers

Take a look at your printer shape settings.

where is home for the davinci.
the sd home is x 200 y 200 Z zero
Home  x max home y max home z Min
X min 0 x max 200 Bed left 0
Y min 0 y max 200 bed front 0
Print area width  depth height 200
Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura