How do you get support material to generate

**cpsmicahel** · 2015-01-17 22:31:40

cpsmicahel
Member
Offline

From: Boonville In
Registered: 2015-01-10
Posts: 86

Topic: How do you get support material to generate

I've enabled it in the slicer I can't seem to get the support material to generate
I have a Workbench apprentice

• Solidoodle Workbench Apprentice
• Creates plastic parts up to 6" x 6" x 8"
• Heated Aluminum Build Platform with Glass Bed
• Dual extruder

**AZERATE** · 2015-01-17 22:40:23

AZERATE
PRINTiT
Offline

From: Chicago
Registered: 2013-11-28
Posts: 2,077

Re: How do you get support material to generate

Are you sure you clicked the boxed?

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

**wardjr** · 2015-01-17 22:44:21

wardjr
Moderator
Offline

From: Minnesota
Registered: 2013-06-10
Posts: 5,624

Re: How do you get support material to generate

And then saved and chose that profile?

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

**cpsmicahel** · 2015-01-17 23:18:20

cpsmicahel
Member
Offline

From: Boonville In
Registered: 2015-01-10
Posts: 86

Re: How do you get support material to generate

Yea I did that and it's not working
What version of slice are you using

• Solidoodle Workbench Apprentice
• Creates plastic parts up to 6" x 6" x 8"
• Heated Aluminum Build Platform with Glass Bed
• Dual extruder

**cpsmicahel** · 2015-01-18 03:05:08

cpsmicahel
Member
Offline

From: Boonville In
Registered: 2015-01-10
Posts: 86

Re: How do you get support material to generate

I think i got it i had to add a few other mods to the gcode thanks

• Solidoodle Workbench Apprentice
• Creates plastic parts up to 6" x 6" x 8"
• Heated Aluminum Build Platform with Glass Bed
• Dual extruder

How do you get support material to generate

Posts: 5

1 Topic by cpsmicahel 2015-01-17 22:31:40

Topic: How do you get support material to generate

2 Reply by AZERATE 2015-01-17 22:40:23

Re: How do you get support material to generate

3 Reply by wardjr 2015-01-17 22:44:21

Re: How do you get support material to generate

4 Reply by cpsmicahel 2015-01-17 23:18:20 (edited by cpsmicahel 2015-01-17 23:19:27)

Re: How do you get support material to generate

5 Reply by cpsmicahel 2015-01-18 03:05:08

Re: How do you get support material to generate

Posts: 5