26 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: New Davinci 1.0A with Firmware 1.0.3?

Steff00212 wrote:

Hey guys smile
I am such a stupid person. I got a DaVinci with 1.0.3 Firmware. Aaaaand, I flashed it...
Now I have got a really big problem. It doesn't work anymore. Now I need the 1.0.3 Firmware.
Does anybody know where I can get it?
smile


It does not exist right now. No one has been able to rip the original from the device yet, and they are still working on a Repetier version due to XYZ changing pin-outs to screw the previous release. Apparently XYZ thinks they are in a war of some kind to prevent users from jail breaking their units. They still think the cartridges are the right method of marketing.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

27 Reply by georgehine (edited by georgehine 2014-12-18 19:48:24)

  • georgehine
  • Member
  • Offline
  • Registered: 2014-11-29
  • Posts: 109

Re: New Davinci 1.0A with Firmware 1.0.3?

http://voltivo.com/forum/davinci-peersu … mware-info

that is your best bet. I think there is a working firmware for repetier at least please update us of your findings so others may get their machines going again.



here is the link to the firmware I think

https://sites.google.com/a/ogremustcrus … =0&d=1

Da Vinci 1.0 stock firmware and stock xyzware.
3D printer Noob.
Stock ABS filaments

28 Reply by xairflyer

  • xairflyer
  • Member
  • Offline
  • Registered: 2014-12-17
  • Posts: 43

Re: New Davinci 1.0A with Firmware 1.0.3?

Does the cartridge reset still work on the 1.0A

29 Reply by georgehine (edited by georgehine 2014-12-20 20:38:21)

  • georgehine
  • Member
  • Offline
  • Registered: 2014-11-29
  • Posts: 109

Re: New Davinci 1.0A with Firmware 1.0.3?

xairflyer wrote:

Does the cartridge reset still work on the 1.0A

It might work but you have to block XYZWARE from accessing the internet using a firewall.

Da Vinci 1.0 stock firmware and stock xyzware.
3D printer Noob.
Stock ABS filaments

30 Reply by buzzerco (edited by buzzerco 2014-12-21 08:30:58)

  • buzzerco
  • Newbie
  • Offline
  • Registered: 2014-12-21
  • Posts: 2

Re: New Davinci 1.0A with Firmware 1.0.3?

Steff00212 wrote:

Hey guys smile
I am such a stupid person. I got a DaVinci with 1.0.3 Firmware. Aaaaand, I flashed it...
Now I have got a really big problem. It doesn't work anymore. Now I need the 1.0.3 Firmware.
Does anybody know where I can get it?
smile

I have the same one and I flashed the firmware and messed it up and this is how I got it working.
Get the boot loader to come up on the printer by pressing the up and down arrow and then power it up,
if it does the usb will work again and you maybe able to use the xyzware to re-flash it.

31 Reply by Steff00212

  • Steff00212
  • Newbie
  • Offline
  • Registered: 2014-12-18
  • Posts: 2

Re: New Davinci 1.0A with Firmware 1.0.3?

I flashed it. It works now with Repetier-.92-3F10A.bin. It seems to work quite well if the printer is NOT connected to the PC.  Even if the USB cable is connected without any sort of Computer the display will not work properly. But, if everything is disconnected, the printer works fine.

32 Reply by mpoffo

  • mpoffo
  • Member
  • Offline
  • From: Milwaukee WI Area
  • Registered: 2014-12-09
  • Posts: 184

Re: New Davinci 1.0A with Firmware 1.0.3?

drag0ndu42 wrote:
fawefawef wrote:

This is probably a dumb question, but do reset cartridges still work in the DaVinci 1.0A? I have not moved past  1.1.G on my Davinci 1.0 and want to get a second printer.

I'm curious to this myself. I am on 1.0.3 and just ordered the arduino to build the reseter. I hope to have it built early next week and will report back. If I can't reset and use my own filament then this thing is going back. I love it and all but there is no way I am paying twice the market price for ABS. The ROI on a more open source printer is pretty quick when you look at the total lifecycle cost of the "cheaper" davinci, but that's their business model.

I am not sure of all re-setters but the XYZZEROCART works well with 1.0A.  You need to block the software with your firewall.

DaVinci 1.0A with Repetier .92
Simplify 3D
E3DV6

33 Reply by Jonjon516 (edited by Jonjon516 2014-12-28 07:53:38)

  • Jonjon516
  • Newbie
  • Offline
  • Registered: 2014-12-07
  • Posts: 1

Re: New Davinci 1.0A with Firmware 1.0.3?

yes still works.
my software ver. 1.1.33.3 and FW ver. 1.0.3 da vinci 1.0a
i just have to change the from 120m to 240.
no mod done on the printer except for the firewall settings to black it.
thats it.

34 Reply by Ian T

  • Ian T
  • Newbie
  • Offline
  • Registered: 2014-12-29
  • Posts: 1

Re: New Davinci 1.0A with Firmware 1.0.3?

Hello everyone - my first post and this thread is the main reason for my registering on the forum, although looking around this seems to be the place to be. smile

I think I'm about to buy a single extruder Da Vinci but would appreciate some clarification please so I can do so with a bit more confidence. My goal is to print in ABS (mainly, happy to mod it later for PLA or other materials) without being tied to XYZ's proprietary filament.

I was about to confidently order a 1.0 from Amazon until I read on Voltivo that XYZ had updated the printer to the 1.0A model including a different electronic control board rendering (temporarily perhaps) the old firmwares and alternative (repetier etc) incompatible, not to mention as mentioned here, no route back to stock firmware after flashing.

Given that eventually the clever guys over on Voltivo (and no doubt here also) will crack this, is it worth holding out for an old model printer or getting the new one now?

Is the cartridge resetter really still working OK on the latest model and is it possible to adjust (via the cartridge programming) the bed and extruder temperatures to allow different materials to be used?

Any advice would be really appreciated. :-)

35 Reply by mpoffo (edited by mpoffo 2014-12-30 01:33:19)

  • mpoffo
  • Member
  • Offline
  • From: Milwaukee WI Area
  • Registered: 2014-12-09
  • Posts: 184

Re: New Davinci 1.0A with Firmware 1.0.3?

Ian T wrote:

Hello everyone - my first post and this thread is the main reason for my registering on the forum, although looking around this seems to be the place to be. smile

I think I'm about to buy a single extruder Da Vinci but would appreciate some clarification please so I can do so with a bit more confidence. My goal is to print in ABS (mainly, happy to mod it later for PLA or other materials) without being tied to XYZ's proprietary filament.

I was about to confidently order a 1.0 from Amazon until I read on Voltivo that XYZ had updated the printer to the 1.0A model including a different electronic control board rendering (temporarily perhaps) the old firmwares and alternative (repetier etc) incompatible, not to mention as mentioned here, no route back to stock firmware after flashing.

Given that eventually the clever guys over on Voltivo (and no doubt here also) will crack this, is it worth holding out for an old model printer or getting the new one now?

Is the cartridge resetter really still working OK on the latest model and is it possible to adjust (via the cartridge programming) the bed and extruder temperatures to allow different materials to be used?

Any advice would be really appreciated. :-)

I can't be certain but I thought I read somewhere there is a working version of repetier working on this model.  I have the newer one (1.0.3 - 1.0A on the display).  My understanding is the older firmware will not work on this but I have not tried nor think I will at this point.

I just recently purchased the XYZZEROCART from WCtek.com.

It works well and lets me set the temps for the extruder and the heat bed.  I picked this model to have it done wirelessly.  I just block the XYZ software as others have mentioned and all works well.

So far I am enjoying my printer.  It is odd how much time I find myself just watching it work.  Lol.

DaVinci 1.0A with Repetier .92
Simplify 3D
E3DV6

36 Reply by asiddiqui86

  • asiddiqui86
  • Member
  • Offline
  • Registered: 2015-03-14
  • Posts: 17

Re: New Davinci 1.0A with Firmware 1.0.3?

stupidest printers ever dont buy one believe me nothing but headaches for the past year with this thing