1 Topic by Zortwil

  • Zortwil
  • Member
  • Offline
  • Registered: 2014-07-18
  • Posts: 38

Topic: Just got new SD4. Y Axis Help!

Hi, so I just received a SD4 and have had a few problems with it, but I've finally gotten those sorted out. Now my problem is, in repetier, if I press the +Z button, it goes down and vice versa. How do I fix this? Thanks.

2 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Just got new SD4. Y Axis Help!

I sure you didn't mean to post this nine times please delete the other eight.
Why would you want to fix something that isn't broke.  It seems backwards but that's how it's supposed to be.  Think of it as +1 layer the bed has to move down for that to happen.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

3 Reply by Zortwil

  • Zortwil
  • Member
  • Offline
  • Registered: 2014-07-18
  • Posts: 38

Re: Just got new SD4. Y Axis Help!

wardjr wrote:

I sure you didn't mean to post this nine times please delete the other eight.
Why would you want to fix something that isn't broke.  It seems backwards but that's how it's supposed to be.  Think of it as +1 layer the bed has to move down for that to happen.

Oh, alright.

I think my internet might have died as I was pressing the submit reply button. They'll be gone in a sec. smile

4 Reply by grob (edited by grob 2014-09-19 04:09:29)

  • grob
  • grob
  • Member
  • Offline
  • From: Sydney, Australia
  • Registered: 2014-01-02
  • Posts: 900

Re: Just got new SD4. Y Axis Help!

wardjr wrote:

I sure you didn't mean to post this nine times please delete the other eight.

At least now Zortwil will be able to post links due to the exaggerated post count! smile
Or does deleting them reduce the count?? EDIT: just checked, and indeed the post count does not reduce if you delete one...

SD3. Mk2b + glass, heated enclosure, GT2 belts, direct drive y shaft, linear bearings, bowden-feed E3D v5 w/ 0.9° stepper
Smoothieboard via Octoprint on RPi