1 Topic by forrestmc4 (edited by forrestmc4 2014-08-16 04:51:35)

  • forrestmc4
  • Newbie
  • Offline
  • Registered: 2013-05-04
  • Posts: 7

Topic: Did SD change vanilla SD3 Support in RH?

I did a clean windows install on the PC that runs my printer. Unfortunately, the RH files I downloaded from Solidoodle today have different presets than my old version and the printer won't respond.

Printer is an SD3 with a Sang board from May 2013. If there isn't a quick place to download the software, could someone point me to the SD3 stats so I can manually create a profile?

Thanks,

Forrest

Edit: Have also installed .net framework and usb driver.

2 Reply by n2ri

  • n2ri
  • Member
  • Offline
  • From: St Louis MO USA area
  • Registered: 2013-02-03
  • Posts: 2,539

Re: Did SD change vanilla SD3 Support in RH?

check baud rate in RH settings if 115k try 250k or visaversa

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

3 Reply by forrestmc4

  • forrestmc4
  • Newbie
  • Offline
  • Registered: 2013-05-04
  • Posts: 7

Re: Did SD change vanilla SD3 Support in RH?

Issue resolved. Diagnosis: Insufficient Operator Head Space

4 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Did SD change vanilla SD3 Support in RH?

forrestmc4 wrote:

Issue resolved. Diagnosis: Insufficient Operator Head Space

We've all been there before wink

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website