1 Topic by CrazyBear

  • CrazyBear
  • Member
  • Offline
  • From: Orange County, CA
  • Registered: 2013-02-18
  • Posts: 82

Topic: E3D v6 and MK5

I was going to order the E3D extruder for my printer (SD3) and I noticed they have the new v6. Does any of you have the v6 installed using Lawsy's MK5? Most of the post I have seen with the MK5 are for the older version of the E3D.

Thank you in advance for your help,

CB

2 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: E3D v6 and MK5

Posted on this just yesterday........

http://www.soliforum.com/topic/3016/mk5 … ed/page/4/

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

3 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: E3D v6 and MK5

This seems to be the question of the day....the MK5 needs to be modified to fit the v6. A couple of bright users on here are working on it.

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

4 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: E3D v6 and MK5

Boom!

Here's the new STL, for anyone that missed it:

http://www.soliforum.com/topic/6497/e3d … al-hotend/

Thanks wardjr!

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

5 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: E3D v6 and MK5

elmoret wrote:

Boom!

Here's the new STL, for anyone that missed it:

http://www.soliforum.com/topic/6497/e3d … al-hotend/

Thanks wardjr!

And It has been updated .5mm's up

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website