You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Help/Repair/Maintenance → Park, home, and Y axis skip problems after E3D install
Replaced the print bed and was able to level it, without any sign of warping. Doing a print now on glass. Three layers down and no curl so far.
If this continues to be working through a few days of testing, I'm going to be posting for sale soon.
Just as you finally get it to your liking?
Only took two months to finally finish printing the five signs like this I started when I was building my recycle center. Used about half a spool of green filament on all the failures, too.
And there's the recycle sort center, at last complete. Each of the sign halves slides out so I can rearrange or replace them if I ever need to reconfigure the recycle center.
http://www.thingiverse.com/thing:138645
Are the stepper motors 12v?
I don't have that printer anymore, but the stepper motors were original equipment, so whatever that was.
SoliForum - 3D Printing Community → Help/Repair/Maintenance → Park, home, and Y axis skip problems after E3D install
Powered by PunBB, supported by Informer Technologies, Inc.
