1 Topic by blacky.blackwell

  • blacky.blackwell
  • Member
  • Offline
  • Registered: 2013-10-12
  • Posts: 20

Topic: Extruder Fan Mod

To use an extruder fan with a SD2, solder in some 90 deg header pins on the top of the board marked fan. Have to remove the solder from the via's first. Then the fan can be controlled in Repetier with the fan control. The pin is controlled through a mosfet already.

Post's attachments

DSC02532.JPG
DSC02532.JPG 165.24 kb, file has never been downloaded. 

DSC02536.JPG 164.34 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by ysb

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: Extruder Fan Mod

nice catch smile

Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

3 Reply by pirvan

  • pirvan
  • pirvan
  • Member
  • Offline
  • From: San Francisco
  • Registered: 2013-03-27
  • Posts: 1,797

Re: Extruder Fan Mod

Oh man, on that first picture, the board looks like it was salvaged from the Titanic. smile

To print or, 3D print, that is the question...
SD3 printer w/too many mods,  Printrbot Simple Maker Ed.,  FormLabs Form 1+
AnyCubic Photon, Shining 3D EinScan-S & Atlas 3D scanners...
...and too much time on my hands.

4 Reply by blacky.blackwell

  • blacky.blackwell
  • Member
  • Offline
  • Registered: 2013-10-12
  • Posts: 20

Re: Extruder Fan Mod

Thanks

The night setting on my camera does that, That one is actually pretty good compared to some.