1 Topic by Claghorn

  • Claghorn
  • Member
  • Offline
  • From: Delray Beach, FL
  • Registered: 2012-10-22
  • Posts: 730

Topic: Clip-on foamboard case

This is a work in progress (and mainly an openscad learning exercise), but my foamboard case is actually looking pretty nice (and was really cheap since I already had the foamboard).

http://home.comcast.net/~tomhorsley/hardware/solidoodle/case/three-sides.jpg

Full write-up and openscad model for the clips can be found at:

http://home.comcast.net/~tomhorsley/har … dle%20Mods

Claghorn's Website

2 Reply by adrian

  • adrian
  • Member
  • Offline
  • From: Canberra, Australia
  • Registered: 2013-01-15
  • Posts: 1,623

Re: Clip-on foamboard case

nice... I use foamboard... but I'm lazy and just glued some thin fridge magnets to it ...