1 Topic by Stellar

  • Stellar
  • Newbie
  • Offline
  • Registered: 2013-07-31
  • Posts: 2

Topic: The plastic not flat

The first layer can stick on the bed, but it's not flat, sometimes there is a lot of filament extruded from the nozzle, so when print the 2nd layer, the first layer(the place too high) be striped by the extruder.
BTW, I set the extruder's temperature at 195 degree, and the bed temperature 95 degree, I'm not sure the temperature is suitable or not. The filament is ABS.
And I'v tried change the flowrate at 50% and 150%, it seems no effect.
I don't know what's the problem.

2 Reply by solijohn

  • solijohn
  • Member
  • Offline
  • Registered: 2012-08-07
  • Posts: 1,465

Re: The plastic not flat

Stellar wrote:

The first layer can stick on the bed, but it's not flat, sometimes there is a lot of filament extruded from the nozzle, so when print the 2nd layer, the first layer(the place too high) be striped by the extruder.
BTW, I set the extruder's temperature at 195 degree, and the bed temperature 95 degree, I'm not sure the temperature is suitable or not. The filament is ABS.
And I'v tried change the flowrate at 50% and 150%, it seems no effect.
I don't know what's the problem.

can you show us a picture?

Former Solidoodle employee, no longer associated with the company.

3 Reply by Stellar (edited by Stellar 2013-08-02 15:03:41)

  • Stellar
  • Newbie
  • Offline
  • Registered: 2013-07-31
  • Posts: 2

Re: The plastic not flat

I will update the picture later. For ABS materia, the temperature of extruder 195 degree is enough or I should turn up the temperature?
I have uploaded the pictures, please help to figure out the reason?

Post's attachments

CIMG2701.JPG
CIMG2701.JPG 789.07 kb, file has never been downloaded. 

CIMG2702.JPG
CIMG2702.JPG 657 kb, file has never been downloaded. 

CIMG2710.JPG
CIMG2710.JPG 196.16 kb, file has never been downloaded. 

CIMG2712.JPG
CIMG2712.JPG 452.21 kb, file has never been downloaded. 

setting.JPG
setting.JPG 1.12 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.