1 Topic by LdyMox (edited by LdyMox 2013-05-22 22:11:20)

  • LdyMox
  • LdyMox
  • Member
  • Offline
  • From: Buffalo, NY USA
  • Registered: 2013-04-27
  • Posts: 576

Topic: Y Axis does not move

I just got my Soildoodle 2 today. The Y axis is not moving, I hear something trying to move. The X and Z move fine. When I press the Y axis I see a motor rod in the back spinning, but nothing happens and the belt does not move. I can manually move the Y axis but not via the controls. The rod on the motor spins but never moves the belt.

Tammy
Solidoodle 2
E3Dv6 Hotend, MK5 v6 version, Glass Bed, Anti Z backlash slop nut, SureStepr SD8825 1/32 Extruder Driver, makeshift breakaway plexiglass case; . L-Cheapo 3.8 Watt Laser Attachment w/Custom built enclosure
From Buffalo, NY, USA

2 Reply by 2n2r5 (edited by 2n2r5 2013-05-22 23:10:11)

  • 2n2r5
  • 2n2r5
  • Member
  • Offline
  • From: Frederick, MD
  • Registered: 2013-05-09
  • Posts: 1,208

Re: Y Axis does not move

Check to make sure the set screw y-axis motor pulley is tight on the motor shaft. Sorry to hear the out of the box problems. let's hope that we can get you printing quickly.

SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.

2n2r5's Website

3 Reply by LdyMox

  • LdyMox
  • LdyMox
  • Member
  • Offline
  • From: Buffalo, NY USA
  • Registered: 2013-04-27
  • Posts: 576

Re: Y Axis does not move

I just fixed it, I think. There was a tiny hex bolt on the rod that came out of the Y motor, I tightened it. Now it seems to be moving.

Tammy
Solidoodle 2
E3Dv6 Hotend, MK5 v6 version, Glass Bed, Anti Z backlash slop nut, SureStepr SD8825 1/32 Extruder Driver, makeshift breakaway plexiglass case; . L-Cheapo 3.8 Watt Laser Attachment w/Custom built enclosure
From Buffalo, NY, USA

4 Reply by 2n2r5

  • 2n2r5
  • 2n2r5
  • Member
  • Offline
  • From: Frederick, MD
  • Registered: 2013-05-09
  • Posts: 1,208

Re: Y Axis does not move

Awesome.. glad to hear it!

SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.

2n2r5's Website

5 Reply by LdyMox

  • LdyMox
  • LdyMox
  • Member
  • Offline
  • From: Buffalo, NY USA
  • Registered: 2013-04-27
  • Posts: 576

Re: Y Axis does not move

well now it is not sticking at all but at least it is moving lol

Tammy
Solidoodle 2
E3Dv6 Hotend, MK5 v6 version, Glass Bed, Anti Z backlash slop nut, SureStepr SD8825 1/32 Extruder Driver, makeshift breakaway plexiglass case; . L-Cheapo 3.8 Watt Laser Attachment w/Custom built enclosure
From Buffalo, NY, USA

6 Reply by LdyMox

  • LdyMox
  • LdyMox
  • Member
  • Offline
  • From: Buffalo, NY USA
  • Registered: 2013-04-27
  • Posts: 576

Re: Y Axis does not move

Ok, this is odd, seems I have to re-tighten the screw over and over and it keeps giving out in the first layer

Tammy
Solidoodle 2
E3Dv6 Hotend, MK5 v6 version, Glass Bed, Anti Z backlash slop nut, SureStepr SD8825 1/32 Extruder Driver, makeshift breakaway plexiglass case; . L-Cheapo 3.8 Watt Laser Attachment w/Custom built enclosure
From Buffalo, NY, USA

7 Reply by Gordym

  • Gordym
  • Member
  • Offline
  • From: Adrian, MI
  • Registered: 2012-08-10
  • Posts: 317

Re: Y Axis does not move

You might need to add a drop of locktite to the screw to hold it in place.

SD2
E3D V6
MK5 V6

8 Reply by LdyMox (edited by LdyMox 2013-05-23 12:07:57)

  • LdyMox
  • LdyMox
  • Member
  • Offline
  • From: Buffalo, NY USA
  • Registered: 2013-04-27
  • Posts: 576

Re: Y Axis does not move

I think i got it eventually. For at least one print it held by adjusting a few of those screws. Hopefully I found the sweetspot if not I can try what you suggest

Tammy
Solidoodle 2
E3Dv6 Hotend, MK5 v6 version, Glass Bed, Anti Z backlash slop nut, SureStepr SD8825 1/32 Extruder Driver, makeshift breakaway plexiglass case; . L-Cheapo 3.8 Watt Laser Attachment w/Custom built enclosure
From Buffalo, NY, USA

9 Reply by op7ical

  • op7ical
  • Member
  • Offline
  • From: Orlando, FL
  • Registered: 2013-01-21
  • Posts: 136

Re: Y Axis does not move

You might have some debris stuck under the screw also.  Make sure there are no little metal shavings underneath.