1 Topic by CrazyBear (edited by CrazyBear 2013-03-16 22:49:43)

  • CrazyBear
  • Member
  • Offline
  • From: Orange County, CA
  • Registered: 2013-02-18
  • Posts: 82

Topic: SD3 Noob: Extruder Fan issues

Hi,

I printed Lawsy extruder fan duct and it looks like Soliddodle changed the mount of the extruder design/parts. There is a screw that is long enough to stop the fan duct to set in place. Any ideas?

Thanks,

CB

Post's attachments

photo 1 (3).JPG
photo 1 (3).JPG 672.6 kb, file has never been downloaded. 

photo 2 (3).JPG
photo 2 (3).JPG 137.42 kb, file has never been downloaded. 

photo 3 (3).JPG
photo 3 (3).JPG 579.99 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by pcpoirier

  • pcpoirier
  • Member
  • Offline
  • From: Wichita Ks
  • Registered: 2012-10-25
  • Posts: 231

Re: SD3 Noob: Extruder Fan issues

these is a newer one copied from Lawsy's with a relief.  probably simplest is to cut a hole.

3 Reply by DePartedPrinter

  • DePartedPrinter
  • Moderator
  • Offline
  • From: Colorado
  • Registered: 2012-08-14
  • Posts: 1,478

Re: SD3 Noob: Extruder Fan issues

I cut a hole in mine to solve this. worked fine

SD2 with E3D, SD Press, Form 1+
Filastruder
NYLON (taulman): http://www.soliforum.com/topic/466/nylon/