Re: Android App for resetting/writing blank ntags
Te link for the APK doesn't work
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing Hacks & Mods → Android App for resetting/writing blank ntags
Te link for the APK doesn't work
http://www.soliforum.com/post/152205/#p152205
link works perfect
It gives me this message when I try to use it on a 213. I used another app to verify it was (second pic)
Thanks for this pretty NTAG refill tool (v1.52).
Works excellent with PLA for miniMaker.
Now i got a problem with PETG. Creating a NFD tab is really simple. Only setting the nozzle temperature is disabled and preset to 215 degree.
This is too low. The layers adhere not well and the printed object is useless.
Is there any way to enable setting of nozzle temperature for PETG too?
I appreciate that very much.
Thanks for this pretty NTAG refill tool (v1.52).
Works excellent with PLA for miniMaker.Now i got a problem with PETG. Creating a NFD tab is really simple. Only setting the nozzle temperature is disabled and preset to 215 degree.
This is too low. The layers adhere not well and the printed object is useless.
Is there any way to enable setting of nozzle temperature for PETG too?
I appreciate that very much.
Can you set individual page values in the app?
It's page 09 that you need to adjust.
felix80 wrote:Thanks for this pretty NTAG refill tool (v1.52).
Works excellent with PLA for miniMaker.Now i got a problem with PETG. Creating a NFD tab is really simple. Only setting the nozzle temperature is disabled and preset to 215 degree.
This is too low. The layers adhere not well and the printed object is useless.
Is there any way to enable setting of nozzle temperature for PETG too?
I appreciate that very much.Can you set individual page values in the app?
It's page 09 that you need to adjust.
Thanks for your fast response.
When i open the app first i get the screen "Waiting for NFC tag scan" and the second screen is "TAG information" when a tag was found.
There is no possibility (menu) to select more pages than these two.
I'm using a Huawei P9 lite under android 7.0
cgrillo wrote:felix80 wrote:Thanks for this pretty NTAG refill tool (v1.52).
Works excellent with PLA for miniMaker.Now i got a problem with PETG. Creating a NFD tab is really simple. Only setting the nozzle temperature is disabled and preset to 215 degree.
This is too low. The layers adhere not well and the printed object is useless.
Is there any way to enable setting of nozzle temperature for PETG too?
I appreciate that very much.Can you set individual page values in the app?
It's page 08 that you need to adjust. (Originally put 9 - sorry)
Thanks for your fast response.
When i open the app first i get the screen "Waiting for NFC tag scan" and the second screen is "TAG information" when a tag was found.
There is no possibility (menu) to select more pages than these two.
I'm using a Huawei P9 lite under android 7.0
Where are you located?
Hello!
the page 9 (0x08) is the page for filament type and color.
You mean the page 13 (0x0C). This page was originally planned for extruder and bed temperature.
But this was never used for that on Mini/Nano/Junior series.
XYZ use the filament colors to adjust the temperature. Furthermore, you can change it +/- 10°C in the printing software.
In my App, on the first screen (top right corner) you can enable the experimenting mode. This give you the ability to change the extruder and bed temperature (page 13). But this will not help you!
Changing only the color will not help you too. XYZ PETG supports only four colors. If I remember well it was: Clear Red, Orange, White and Clear Blue.
In the worst case it will lock the TAG or mark as non-original/useable.
This is one of the few disadvantages of XYZPrinting system.
Addendum:
you need to look at Page 8 for your color codes. These are what drive the temp.
From what someone else posted '5A 47 32 00' should get you 247 which is PTEG Clear Red.
It gives me this message when I try to use it on a 213. I used another app to verify it was (second
Your TAG is not empty or some pages are locked, wrong password, ect.
Try other one, new one!
@cgrillo Germany
Thanks to all - i found a solution
Could open experimental page in refill tool and adjust temperature to required value
XYZ print software has a feature called "extended editor".
Using this you can detemine a lot of different settings including extruder temperature
This was the solution i was looking for. Now it works satisfiying with PETG
new tags every time i program coming up unidentified
pla
175m
210 degrees
random serial number
firmware 2.4.9
ntag refill tool 1.52
only 100m and 200m are valid in the new firmware.
I would like to download reeltool21.apk. Is it possible to publish it?
I would like to download reeltool21.apk. Is it possible to publish it?
The link is on page one of this thread in the first post.
http://www.soliforum.com/topic/17124/an … ank-ntags/
Thank you.
However, since the link destination is broken, I commented again. I look forward to working with you.
Thank you.
I'm sorry many times.
I'm looking for an early "ReelTool21.apk".
I look forward to working with you.
Thank you.
I'm sorry many times.
I'm looking for an early "ReelTool21.apk".
I look forward to working with you.
That one is made by somebody else. Not the author of the one here. You need to search elsewhere for it.
Thank you for everything.
Due to Google Translate, the text is strange in some places, but please forgive me.
Also, if you have any questions, please do not hesitate to contact us.
m (__) m
Where is this app everyone is talking about
There is a version of it below but I’m not sure it’s latest.
https://github.com/asig/reeltool
pman wrote:Thank you.
I'm sorry many times.
I'm looking for an early "ReelTool21.apk".
I look forward to working with you.That one is made by somebody else. Not the author of the one here. You need to search elsewhere for it.
Does anybody tried nfc hack with Da Vinci Nano?
hola quiero descargar los archivos para resetear pero me aparece un mensaje que me dice que los enlaces estan rotos y no puedo descargarlo, me lo pueden compartir porfavor!?
thanks for the post
Hi.
I recently bought a minimaker.
But it seems like impossible to find original filament in my country where I am.
I need reeltool21.apk but I could not find the file.
Where can I download the program?
SoliForum - 3D Printing Community → XYZ Printing Hacks & Mods → Android App for resetting/writing blank ntags
Powered by PunBB, supported by Informer Technologies, Inc.