Re: Android App for resetting/writing blank ntags
I was also surprised, I don't think a firmware downgrade was necessary.
Re: Android App for resetting/writing blank ntags
I've tried all the tools on this thread with a DaVinici Mini W+ on f/w 1.1.9 and none seem to work. I'm using 213 tags and writing them new from blank, filament length set to 200 (and PETG in my case as that's what I'm using). Prints fail to start with a warning about the filament being invalid (i forgot to capture the exact text...). Has anyone had any success with any app and this configuration?
- carl_m1968
- Member
- Offline
Re: Android App for resetting/writing blank ntags
tintoy wrote:
I've tried all the tools on this thread with a DaVinici Mini W+ on f/w 1.1.9 and none seem to work. I'm using 213 tags and writing them new from blank, filament length set to 200 (and PETG in my case as that's what I'm using). Prints fail to start with a warning about the filament being invalid (i forgot to capture the exact text...). Has anyone had any success with any app and this configuration?
Try the 1 dollar app in the google store that is mentioned a few post back.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Re: Android App for resetting/writing blank ntags
carl_m1968 wrote:
tintoy wrote:I've tried all the tools on this thread with a DaVinici Mini W+ on f/w 1.1.9 and none seem to work. I'm using 213 tags and writing them new from blank, filament length set to 200 (and PETG in my case as that's what I'm using). Prints fail to start with a warning about the filament being invalid (i forgot to capture the exact text...). Has anyone had any success with any app and this configuration?
Try the 1 dollar app in the google store that is mentioned a few post back.
Thanks. I did. No joy. What fw are you on? Did you have to block internet access?
Re: Android App for resetting/writing blank ntags
Same issue with tags generated yesterday on a mini w+. Tried downgrading firmware but I think my tags may already be blacklisted now. Gotta get more blanks and try another round... something definitely failed.
I only run the patched non updating version of xyzprint for slicing, and gmover for printing. So I thought my workflow would be fairly bulletproof.
Re: Android App for resetting/writing blank ntags
My tags that were initially for 240mm stopped working on my mini w+ with fw version 1.1.9. I just created a new one with 200mm PLA and it worked again.
Re: Android App for resetting/writing blank ntags
3dp42 wrote:
My tags that were initially for 240mm stopped working on my mini w+ with fw version 1.1.9. I just created a new one with 200mm PLA and it worked again.
Do you block internet access? Anything else you have to do to make it work? :-)
Re: Android App for resetting/writing blank ntags
3dp42 wrote:
My tags that were initially for 240mm stopped working on my mini w+ with fw version 1.1.9. I just created a new one with 200mm PLA and it worked again.
I don't block internet access and I don't think there is anything else necessary to make it work as of now.
Re: Android App for resetting/writing blank ntags
I set mine to 200mm pla. Just to be in the safe side. I also blocked the internet on the app just to make sure it doesn't give me any unwanted updates on the app. If anyone has a crazy boss store around you and want to get a cheap 3d printer they had some of the xyz da vinci mini for $70 that's where I got mine. I also own an anet e10 and a i3 prusa.
Re: Android App for resetting/writing blank ntags
Hello, why did I write the NFC label and paste it on the detection location, but the machine display could not recognize it
Re: Android App for resetting/writing blank ntags
junior 1.0 w 2.4.7 cant downgrade and have 1 tag left tried 3 earlier none worked any pointers for last tag
Re: Android App for resetting/writing blank ntags
SKEAV wrote:
junior 1.0 w 2.4.7 cant downgrade and have 1 tag left tried 3 earlier none worked any pointers for last tag
are your tags ntag213 if not they will not work if so then try setting it to 240 meters if you are currently setting it with the old version to 300 meters. this works for my mini maker so if it doesn't work for the 1.0 I do not know what to tell you.
Minimaker owner since 2017
Using third party filament since August 2019
Using third party filament since August 2019
Re: Android App for resetting/writing blank ntags
yes they are ntag213 and setting to 200m but i think its the firmware thats changed
364 2019-12-19 17:21:39 (edited by modfreakz 2019-12-19 17:25:05)
- modfreakz
- Member
- Offline
Re: Android App for resetting/writing blank ntags
A big update and lots of new features!
Working as usual now with EmuTag, MagicCards, original Tags and blank Tags (Paper Tags)
Enjoy the new version!
Whats new:
● Added full support for MagicCard
● Added full support for NTAG215 and NTAG216 tags
● Added advanced function to set MagicCard UID and to different TAG type
1 = UL EV1 48k
2 = UL EV1 128k
3 = NTAG 210
4 = NTAG 212
5 = NTAG 213
6 = NTAG 215
7 = NTAG 216
8 = NTAG I2C 1K
9 = NTAG I2C 2K
10 = NTAG I2C plus 1K
11 = NTAG I2C plus 2K
● Added advanced function to set the EmuTag to Sniffing Mode
● Changed maximum valid filament length to 200m (240m and 300m not supported anymore by new 2019 firmware)
● Integrated remember last selected parameters
● Fixed bug in automatic update function
● Added more valid NTAG21x UID/signatures [EmuTag and MagicCard only]
Download-Link:
NTAG_Refill_Tool v1.50
Re: Android App for resetting/writing blank ntags
SKEAV wrote:
yes they are ntag213 and setting to 200m but i think its the firmware thats changed
Well unless you want to flash an older firmware onto your printer which if you do you might a well flash repieter I know that xyz printing has released an official product that lets you print with third party filament, but they are selling it for around $60.
Minimaker owner since 2017
Using third party filament since August 2019
Using third party filament since August 2019
Re: Android App for resetting/writing blank ntags
SKEAV wrote:
yes they are ntag213 and setting to 200m but i think its the firmware thats changed
Well unless you want to flash an older firmware onto your printer which if you do you might a well flash repieter I know that xyz printing has released an official product that lets you print with third party filament, but they are selling it for around $60.
Minimaker owner since 2017
Using third party filament since August 2019
Using third party filament since August 2019
Re: Android App for resetting/writing blank ntags
Dear as they are, I tell you that I have 1 xyz Open Smart Tag original chip, I already tried this application and it does not recognize it, it is a classic 1k look, I listen to opinions to see if it is possible to hack, what I can tell you that the software some Once he shows it with a capacity of 1000 meters
Re: Android App for resetting/writing blank ntags
Well on my experience, i got one exe file someone updated in the thread from a geniune PTEG tag, load in in a paper tag, authenfied and it work! I compared the one from the app you created when printing the key diffence is the monitor on the nozzle temperature went up to 235 Degrees, which the app version only go up to 220 like the
PLA settings.
modfreakz wrote:
I have created wrong parameters (PETG 300m Black) and start printing. After verify printer stops and flashing red light.
Read out the tag and compared. (read before and after)
XYZ write some “garbage” to the pages (4,5,6,7,12,15,16,17) and lock them.
Re: Android App for resetting/writing blank ntags
This app is not at all opening for me just immediately closing are there any suggestion or is there another app anyone is using to let me know how to set these 213 chips please I'm on Android 9.0 g7 power if that makes any difference
- carl_m1968
- Member
- Offline
Re: Android App for resetting/writing blank ntags
linuxmade88 wrote:
This app is not at all opening for me just immediately closing are there any suggestion or is there another app anyone is using to let me know how to set these 213 chips please I'm on Android 9.0 g7 power if that makes any difference
Are you using the app in this post?
http://www.soliforum.com/post/152205/#p152205
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Re: Android App for resetting/writing blank ntags
Yes I've downloaded both that one and the one from madman, I've been able to install it on my phone but both apps immediately close as soon as I try and run them, is there a setting I'm missing that is blocking me from running them? I've had lookout running and I'm about to disable it but I can't imagine it's not allowing me to open a app ya know?
Re: Android App for resetting/writing blank ntags
carl_m1968 wrote:
linuxmade88 wrote:This app is not at all opening for me just immediately closing are there any suggestion or is there another app anyone is using to let me know how to set these 213 chips please I'm on Android 9.0 g7 power if that makes any difference
Are you using the app in this post?
So my phone doesn't support NFC maybe that's why but is there anyway to write to a tag with a computer or just with a phone?
- carl_m1968
- Member
- Offline
Re: Android App for resetting/writing blank ntags
linuxmade88 wrote:
carl_m1968 wrote:linuxmade88 wrote:This app is not at all opening for me just immediately closing are there any suggestion or is there another app anyone is using to let me know how to set these 213 chips please I'm on Android 9.0 g7 power if that makes any difference
Are you using the app in this post?
So my phone doesn't support NFC maybe that's why but is there anyway to write to a tag with a computer or just with a phone?
Google pc nfc writer.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
- Bozotclown1970
- Member
- Offline
Re: Android App for resetting/writing blank ntags
Check out the following thread
Re: Android App for resetting/writing blank ntags
Ok, so I was having some trouble so I'm going to type out what I've been doing and someone can tell me what I'm doing wrong
Firmware 2.4.7
I open the app to generate new tag on to the paper NFC213 sticker
I put the sticker onto the spool I using after removing the old NFC chip
Go to spool stats "unidentified spool"
Am I missing something?