Tools for the sd printers

I've been trying to get together a list of the tools required to work on the ds3 i have and thought this may help others

for the filament pulleu you need a 1.5mm hex key

for the rear set screw you need a 2.5 mm hex i recomend a t handel wrench
http://www.parktool.com/uploads/thumbn … 00x700.jpg

For the hot end you ned a 7/32 wrench or a 6.5mm wrench its hard to tell i'm guessing 6.5 mm a 7/32 socket will work the wrenchs are very hard to find and expensive off amazon

A set of tweezers

to remove prints from the bed a pallet knife works very well
http://www.artsupplies.co.uk/img_item/p … ives_1.jpg they come in a variety of sizes and the thickness is 0.2mm
Pallet knives can be fount at most art supply stores

What other tools do you use