1 Topic by michgal

  • michgal
  • Newbie
  • Offline
  • Registered: 2018-04-25
  • Posts: 2

Topic: EEPROM SETTINGS Repetier DaVinci 2.0A

I just got a Da Vinci 2.0A flashed, but i don't have a clue how to get it working using repetier.
Could someone help me sort it out, very much appreciated. I could help anyone with the flashing process.

2 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: EEPROM SETTINGS Repetier DaVinci 2.0A

if it is flashed with repitier then connect to the machine with rh then open the e prom setting from RH

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3 Reply by michgal

  • michgal
  • Newbie
  • Offline
  • Registered: 2018-04-25
  • Posts: 2

Re: EEPROM SETTINGS Repetier DaVinci 2.0A

Thanks for the reply,

I got is sorted out. I also changed the x and y min values, but it shows the slicing and printing process in repetier host on the wrong spot and not in the center. is there a way to fix this? And maybe someone with a bit more experience has optimal eeprom settings?

4 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: EEPROM SETTINGS Repetier DaVinci 2.0A

Sound like you need to set up your host settings and slicer settings as well.
tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura