<![CDATA[SoliForum - 3D Printing Community — EEPROM SETTINGS Repetier DaVinci 2.0A]]> https://www.soliforum.com/topic/17314/eeprom-settings-repetier-davinci-20a/ Tue, 15 May 2018 21:45:57 +0000 PunBB <![CDATA[Re: EEPROM SETTINGS Repetier DaVinci 2.0A]]> https://www.soliforum.com/post/144010/#p144010 Sound like you need to set up your host settings and slicer settings as well.
tin

]]> Tue, 15 May 2018 21:45:57 +0000 https://www.soliforum.com/post/144010/#p144010 <![CDATA[Re: EEPROM SETTINGS Repetier DaVinci 2.0A]]> https://www.soliforum.com/post/144008/#p144008 Thanks for the reply,

I got is sorted out. I also changed the x and y min values, but it shows the slicing and printing process in repetier host on the wrong spot and not in the center. is there a way to fix this? And maybe someone with a bit more experience has optimal eeprom settings?

]]> Tue, 15 May 2018 17:38:39 +0000 https://www.soliforum.com/post/144008/#p144008 <![CDATA[Re: EEPROM SETTINGS Repetier DaVinci 2.0A]]> https://www.soliforum.com/post/143978/#p143978 if it is flashed with repitier then connect to the machine with rh then open the e prom setting from RH

]]> Mon, 14 May 2018 00:36:02 +0000 https://www.soliforum.com/post/143978/#p143978 <![CDATA[EEPROM SETTINGS Repetier DaVinci 2.0A]]> https://www.soliforum.com/post/143971/#p143971 I just got a Da Vinci 2.0A flashed, but i don't have a clue how to get it working using repetier.
Could someone help me sort it out, very much appreciated. I could help anyone with the flashing process.

]]> Sat, 12 May 2018 17:05:29 +0000 https://www.soliforum.com/post/143971/#p143971