1 Topic by Xware

  • Xware
  • Newbie
  • Offline
  • Registered: 2018-02-16
  • Posts: 2

Topic: Davinci 1.0 Repetier Homing after print./

no matter what I do I cannot get my davinci 1.0s (2 of them)  to quit homing on the Z axis  after printing..  its cruising the prints because its hitting the rails / extruder
davinci 1.0 aio

latest repetier.

printing using repetier host

slicing using slic3r

here is my end gcode

M117 Done
G92 E0 ; reset extrusion distance
M104 S0 ; turn off extruder
M140 S0 ; turn off Bed
G90 ; Absolute
G28 X0 Y0 Z180; home
M117 Down Bed
G1 Z180 ; Lower bed
M84 ; Disable motors