<![CDATA[SoliForum - 3D Printing Community — Davinci 1.0 Repetier Homing after print./]]> https://www.soliforum.com/topic/17138/davinci-10-repetier-homing-after-print/ Fri, 16 Feb 2018 03:06:38 +0000 PunBB <![CDATA[Davinci 1.0 Repetier Homing after print./]]> https://www.soliforum.com/post/142550/#p142550 no matter what I do I cannot get my davinci 1.0s (2 of them)  to quit homing on the Z axis  after printing..  its cruising the prints because its hitting the rails / extruder
davinci 1.0 aio

latest repetier.

printing using repetier host

slicing using slic3r

here is my end gcode

M117 Done
G92 E0 ; reset extrusion distance
M104 S0 ; turn off extruder
M140 S0 ; turn off Bed
G90 ; Absolute
G28 X0 Y0 Z180; home
M117 Down Bed
G1 Z180 ; Lower bed
M84 ; Disable motors

]]> Fri, 16 Feb 2018 03:06:38 +0000 https://www.soliforum.com/post/142550/#p142550