1 Topic by Steelcityairman7

  • Steelcityairman7
  • Newbie
  • Offline
  • Registered: 2017-05-14
  • Posts: 1

Topic: Davinci 2.0 infill not fusing to perimeter

Hey all
I am Extremely new to 3D printing and forgive me if this has been asked before but i tried to print a simple word and the infill did not fuse to the perimeter wall In some places. Also looks like the "o" isn't as circular as the actual design...
i have a stock xyzprinting davinci 2.0 using ABS
any help in the right direction is appreciated
Sorry for the crappy lighting pic

Post's attachments

image.jpg 1.26 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by mark.burton

  • mark.burton
  • Member
  • Offline
  • From: United states
  • Registered: 2015-05-28
  • Posts: 336

Re: Davinci 2.0 infill not fusing to perimeter

you will want to make sure every thing is square. sometimes the axis jump teeth and so its not square.
there are some topics here that already discuss how to check that.
also check that your bearing holders aren't cracked again there are topics already her for those as well.

3 Reply by scobo

  • scobo
  • scobo
  • Member
  • Offline
  • From: Scotland - UK
  • Registered: 2014-08-09
  • Posts: 993

Re: Davinci 2.0 infill not fusing to perimeter

Yeah bad bearing holders will result in oval circles.
Tightening your x and y belts may also improve this.

Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs