https://www.soliforum.com/topic/16430/davinci-20-infill-not-fusing-to-perimeter/ Sun, 28 May 2017 14:44:17 +0000 PunBB https://www.soliforum.com/post/135707/#p135707 Yeah bad bearing holders will result in oval circles.
Tightening your x and y belts may also improve this.

]]> Sun, 28 May 2017 14:44:17 +0000 https://www.soliforum.com/post/135707/#p135707 https://www.soliforum.com/post/135688/#p135688 you will want to make sure every thing is square. sometimes the axis jump teeth and so its not square.
there are some topics here that already discuss how to check that.
also check that your bearing holders aren't cracked again there are topics already her for those as well.

]]> Sun, 28 May 2017 03:00:33 +0000 https://www.soliforum.com/post/135688/#p135688 https://www.soliforum.com/post/135399/#p135399 Hey all
I am Extremely new to 3D printing and forgive me if this has been asked before but i tried to print a simple word and the infill did not fuse to the perimeter wall In some places. Also looks like the "o" isn't as circular as the actual design...
i have a stock xyzprinting davinci 2.0 using ABS
any help in the right direction is appreciated
Sorry for the crappy lighting pic

]]> Sun, 14 May 2017 01:31:52 +0000 https://www.soliforum.com/post/135399/#p135399