1 Topic by Hoogen

  • Hoogen
  • Newbie
  • Offline
  • Registered: 2017-04-12
  • Posts: 1

Topic: Help: Weird Lines/Wobble along print

Hello all,

I just did my first large print and it has some inconsistent lines along the surfaces.

The lines are only on the 2 sides of the print, and it was printed diagonally on the print bed due to the size. 

And idea what is causing this issue?

Printer is an Anet A8.

Thanks!

http://soliforum.com/i/?wISnDYj.jpg

http://soliforum.com/i/?VwBqn65.jpg

http://soliforum.com/i/?ZecV94G.jpg

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Help: Weird Lines/Wobble along print

Looks like z banding. Move your bed to the bottom then send a home command and watch the bed. I bet it wobbles just like the lines in your print. Either your guide rods are bent or there is something loos in the Z axis.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.