1 Topic by letroll

  • letroll
  • Member
  • Offline
  • Registered: 2014-08-28
  • Posts: 20

Topic: pid setup

bonjour à tous,
j'ai fait l'acquisition d'un kit filastruder, que j'ai monté, jusque là tout va bien. J'en suis maintenant au réglage du pid.
J'ai un manuel que voici : http://www.sestos-hk.com/english/download/D1S-EN.pdf auquel je ne comprends pas grand chose.
Quelqu'un est capable de m'aider?
Je veux juste avoir la bonne température pour commencer à faire mes filaments tout simplement...
Pour l'instant lorsque j'allume la machine. Je vois la température mesuré monter indéfiniment. J'ai lu dans les instructions que 180 °c suffisait. Mais la température monte bien plus haut. Comment faire pour la bloquer à 180 ?

Hello everyone,
I purchased a filastruder kit, build it, so far so good. I am now in pid adjustment.
I have a manual here: http://www.sestos-hk.com/english/download/D1S-EN.pdf which I do not understand anything.
Someone is able to help me?
I just want to have the right temperature to start making my filaments simply ...
For now when I turn on the machine. I see the measured temperature rise indefinitely. I read in the instructions that 180 ° c enough. But the temperature rises well above. How to block the 180?

2 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: pid setup

If the temperature rises indefinitely, most likely the wiring is incorrect.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

3 Reply by letroll

  • letroll
  • Member
  • Offline
  • Registered: 2014-08-28
  • Posts: 20

Re: pid setup

you may have saved my machine, I hesitated. I thought it might be normal and I almost let the machine continue to heat. It was a cable moved when I have close the box... Thank you for your help