<![CDATA[SoliForum - 3D Printing Community — pid setup]]> https://www.soliforum.com/topic/15422/pid-setup/ Sun, 21 Aug 2016 18:53:40 +0000 PunBB <![CDATA[Re: pid setup]]> https://www.soliforum.com/post/126444/#p126444 you may have saved my machine, I hesitated. I thought it might be normal and I almost let the machine continue to heat. It was a cable moved when I have close the box... Thank you for your help

]]> Sun, 21 Aug 2016 18:53:40 +0000 https://www.soliforum.com/post/126444/#p126444 <![CDATA[Re: pid setup]]> https://www.soliforum.com/post/126443/#p126443 If the temperature rises indefinitely, most likely the wiring is incorrect.

]]> Sun, 21 Aug 2016 17:30:25 +0000 https://www.soliforum.com/post/126443/#p126443 <![CDATA[pid setup]]> https://www.soliforum.com/post/126440/#p126440 bonjour à tous,
j'ai fait l'acquisition d'un kit filastruder, que j'ai monté, jusque là tout va bien. J'en suis maintenant au réglage du pid.
J'ai un manuel que voici : http://www.sestos-hk.com/english/download/D1S-EN.pdf auquel je ne comprends pas grand chose.
Quelqu'un est capable de m'aider?
Je veux juste avoir la bonne température pour commencer à faire mes filaments tout simplement...
Pour l'instant lorsque j'allume la machine. Je vois la température mesuré monter indéfiniment. J'ai lu dans les instructions que 180 °c suffisait. Mais la température monte bien plus haut. Comment faire pour la bloquer à 180 ?

Hello everyone,
I purchased a filastruder kit, build it, so far so good. I am now in pid adjustment.
I have a manual here: http://www.sestos-hk.com/english/download/D1S-EN.pdf which I do not understand anything.
Someone is able to help me?
I just want to have the right temperature to start making my filaments simply ...
For now when I turn on the machine. I see the measured temperature rise indefinitely. I read in the instructions that 180 ° c enough. But the temperature rises well above. How to block the 180?

]]> Sun, 21 Aug 2016 16:39:32 +0000 https://www.soliforum.com/post/126440/#p126440