1 Topic by fragmen52

  • fragmen52
  • Newbie
  • Offline
  • Registered: 2015-12-31
  • Posts: 4

Topic: Best way to wall mount filastruder v2.0 and filawinder

I was wondering what the best method to mount the filastruder v2.0 and filawinder to the wall.  The only semi convent way I've come up with is using a 2 pronged pegboard thing that fit between the wood and aluminum on the side towards the nozzle but, I don't have much space left on my pegboards and neither are wide enough to mount the filastuder and the winder.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Best way to wall mount filastruder v2.0 and filawinder

Fasten it to a 1/2 inch thick piece of plywood. That can the be mounted to a wall or mounted between uprights on rollers so it can be moved to a closet or some place when not in use.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: Best way to wall mount filastruder v2.0 and filawinder

Before assembling the Filastruder, I'd recommend drilling 2 holes in the chassis on what will be the bottom, and attach that to a larger plank of wood that can be wall mounted as needed. Kinda like this:

http://soliforum.com/i/?7h5Jenq.jpg

(image taken from the post your kits sticky)

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

4 Reply by fragmen52

  • fragmen52
  • Newbie
  • Offline
  • Registered: 2015-12-31
  • Posts: 4

Re: Best way to wall mount filastruder v2.0 and filawinder

elmoret wrote:

Before assembling the Filastruder, I'd recommend drilling 2 holes in the chassis on what will be the bottom, and attach that to a larger plank of wood that can be wall mounted as needed. Kinda like this:

http://soliforum.com/i/?7h5Jenq.jpg

(image taken from the post your kits sticky)

ugh, well I already have to take it apart to rotate the barrel to accommodate the 90 degree hopper anyway.  A mini section on wall mounting the the instructions might be something to consider.