SoliForum - 3D Printing Community — Best way to wall mount filastruder v2.0 and filawinder

Re: Best way to wall mount filastruder v2.0 and filawinder

null@example.com (fragmen52) — Thu, 07 Jan 2016 03:20:39 +0000

elmoret wrote:

Before assembling the Filastruder, I'd recommend drilling 2 holes in the chassis on what will be the bottom, and attach that to a larger plank of wood that can be wall mounted as needed. Kinda like this:
(image taken from the post your kits sticky)

ugh, well I already have to take it apart to rotate the barrel to accommodate the 90 degree hopper anyway. A mini section on wall mounting the the instructions might be something to consider.

Re: Best way to wall mount filastruder v2.0 and filawinder

null@example.com (elmoret) — Thu, 07 Jan 2016 01:55:32 +0000

Before assembling the Filastruder, I'd recommend drilling 2 holes in the chassis on what will be the bottom, and attach that to a larger plank of wood that can be wall mounted as needed. Kinda like this:

(image taken from the post your kits sticky)

Re: Best way to wall mount filastruder v2.0 and filawinder

null@example.com (carl_m1968) — Thu, 07 Jan 2016 01:32:17 +0000

Fasten it to a 1/2 inch thick piece of plywood. That can the be mounted to a wall or mounted between uprights on rollers so it can be moved to a closet or some place when not in use.

Best way to wall mount filastruder v2.0 and filawinder

null@example.com (fragmen52) — Thu, 07 Jan 2016 01:16:13 +0000

I was wondering what the best method to mount the filastruder v2.0 and filawinder to the wall. The only semi convent way I've come up with is using a 2 pronged pegboard thing that fit between the wood and aluminum on the side towards the nozzle but, I don't have much space left on my pegboards and neither are wide enough to mount the filastuder and the winder.