1 Topic by ElectricEnigma

  • ElectricEnigma
  • Newbie
  • Offline
  • Registered: 2016-01-02
  • Posts: 5

Topic: Issue with Cura and Repetier Host with 1.0A

Whenever I try to print using CuraEngine, the temperature I set for the specified filament is not the temperature that the machine heats to. For example, I try to set the print temp to 225 degrees and bed temp to 98 degrees, but when I open the manual control tab, the print temp is set to 210 and the bed temp is set to 50 and I have to manually change the temperatures from there. Any ideas on how to fix this? Thanks

2 Reply by carl_m1968 (edited by carl_m1968 2016-01-02 20:52:34)

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Issue with Cura and Repetier Host with 1.0A

There are printer settings in Rep Host that have initial temp settings in them. Once the print starts then the temps in the slicer will override those temps.

By the way you posted this four times so you might want to go back and delete the extra post.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by ElectricEnigma

  • ElectricEnigma
  • Newbie
  • Offline
  • Registered: 2016-01-02
  • Posts: 5

Re: Issue with Cura and Repetier Host with 1.0A

That was the problem, thanks.

And yeah, I just noticed that I accidentally posted it a bunch of times. Sorry smile I deleted them