<![CDATA[SoliForum - 3D Printing Community — Issue with Cura and Repetier Host with 1.0A]]> https://www.soliforum.com/topic/13264/issue-with-cura-and-repetier-host-with-10a/ Sat, 02 Jan 2016 20:54:36 +0000 PunBB <![CDATA[Re: Issue with Cura and Repetier Host with 1.0A]]> https://www.soliforum.com/post/113111/#p113111 That was the problem, thanks.

And yeah, I just noticed that I accidentally posted it a bunch of times. Sorry smile I deleted them

]]> Sat, 02 Jan 2016 20:54:36 +0000 https://www.soliforum.com/post/113111/#p113111 <![CDATA[Re: Issue with Cura and Repetier Host with 1.0A]]> https://www.soliforum.com/post/113110/#p113110 There are printer settings in Rep Host that have initial temp settings in them. Once the print starts then the temps in the slicer will override those temps.

By the way you posted this four times so you might want to go back and delete the extra post.

]]> Sat, 02 Jan 2016 20:51:36 +0000 https://www.soliforum.com/post/113110/#p113110 <![CDATA[Issue with Cura and Repetier Host with 1.0A]]> https://www.soliforum.com/post/113109/#p113109 Whenever I try to print using CuraEngine, the temperature I set for the specified filament is not the temperature that the machine heats to. For example, I try to set the print temp to 225 degrees and bed temp to 98 degrees, but when I open the manual control tab, the print temp is set to 210 and the bed temp is set to 50 and I have to manually change the temperatures from there. Any ideas on how to fix this? Thanks

]]> Sat, 02 Jan 2016 20:39:04 +0000 https://www.soliforum.com/post/113109/#p113109