1 Topic by Manx

  • Manx
  • Member
  • Offline
  • Registered: 2012-09-25
  • Posts: 524

Topic: Air filter for SD2 or 3

this is designed to work with a charcoal inset filter i have not designed a spacific filter for this but i will later you will need an appropriate sized fan insert i have found there are usb adapters to run a 3-4 pin computer fan so i need one of those a fan of course and i will clarify my design later this is designed so i can attach a vent to the exterior of the case i may want to have 2 openings so that the heat is beign circuleted back into the case

so the hardware is a fan 4 screws and a charcoal filter

Post's attachments

air_filter.stl 60.14 kb, 52 downloads since 2013-01-30 

You don't have the permssions to download the attachments of this post.

2 Reply by Manx

  • Manx
  • Member
  • Offline
  • Registered: 2012-09-25
  • Posts: 524

Re: Air filter for SD2 or 3

well i rethought the design some and madesome small changes to the file to include hose adapters to make this acomplet self contained unit so the air will recirculte and keep the heat in the unit i may make further changes for ease of printing and to save material

Post's attachments

air_filter(1).stl 136.61 kb, 35 downloads since 2013-01-30 

You don't have the permssions to download the attachments of this post.

3 Reply by satman49 (edited by satman49 2013-01-30 19:39:45)

  • satman49
  • Member
  • Offline
  • From: virginia
  • Registered: 2012-12-28
  • Posts: 867

Re: Air filter for SD2 or 3

How are you doing the 3 D preview?

SD3, E3D hotend,linear bearing on x/y axis',pillow block bearing on y conneting rod, ball bearngs on front y axis, fan on y stepper motor.

4 Reply by cmetzel

  • cmetzel
  • Member
  • Offline
  • From: Solidoodle2 #0091
  • Registered: 2012-08-22
  • Posts: 1,429

Re: Air filter for SD2 or 3

satman49 wrote:

How are you doing the 3 D preview?

Just upload an STL it's automatic.

5 Reply by Manx

  • Manx
  • Member
  • Offline
  • Registered: 2012-09-25
  • Posts: 524

Re: Air filter for SD2 or 3

and here is the air filter cartridge

it will needtobe filled with a charcoak cloth or charcoal

Post's attachments

air_filter_cartridge.stl 278.79 kb, 34 downloads since 2013-01-30 

You don't have the permssions to download the attachments of this post.

6 Reply by nickythegreek

  • nickythegreek
  • Member
  • Offline
  • Registered: 2012-11-18
  • Posts: 673

Re: Air filter for SD2 or 3

Get a pic up once you get this guy installed!

7 Reply by Manx (edited by Manx 2013-01-30 22:42:33)

  • Manx
  • Member
  • Offline
  • Registered: 2012-09-25
  • Posts: 524

Re: Air filter for SD2 or 3

lol i will once i get a printer i'm going to tinker this to see if i can improve the design so you don't have to print as much in materials

8 Reply by Manx

  • Manx
  • Member
  • Offline
  • Registered: 2012-09-25
  • Posts: 524

Re: Air filter for SD2 or 3

ok so her is the revison ist 1 mm smaller this should be easier to print

Post's attachments

air_filter_cartridge_b.stl 280.16 kb, 34 downloads since 2013-01-30 

You don't have the permssions to download the attachments of this post.