<![CDATA[SoliForum - 3D Printing Community — Air filter for SD2 or 3]]> https://www.soliforum.com/topic/1175/air-filter-for-sd2-or-3/ Wed, 30 Jan 2013 23:04:58 +0000 PunBB <![CDATA[Re: Air filter for SD2 or 3]]> https://www.soliforum.com/post/11145/#p11145 ok so her is the revison ist 1 mm smaller this should be easier to print

]]> Wed, 30 Jan 2013 23:04:58 +0000 https://www.soliforum.com/post/11145/#p11145 <![CDATA[Re: Air filter for SD2 or 3]]> https://www.soliforum.com/post/11139/#p11139 lol i will once i get a printer i'm going to tinker this to see if i can improve the design so you don't have to print as much in materials

]]> Wed, 30 Jan 2013 22:38:38 +0000 https://www.soliforum.com/post/11139/#p11139 <![CDATA[Re: Air filter for SD2 or 3]]> https://www.soliforum.com/post/11138/#p11138 Get a pic up once you get this guy installed!

]]> Wed, 30 Jan 2013 22:35:58 +0000 https://www.soliforum.com/post/11138/#p11138 <![CDATA[Re: Air filter for SD2 or 3]]> https://www.soliforum.com/post/11124/#p11124 and here is the air filter cartridge

it will needtobe filled with a charcoak cloth or charcoal

]]> Wed, 30 Jan 2013 20:49:47 +0000 https://www.soliforum.com/post/11124/#p11124 <![CDATA[Re: Air filter for SD2 or 3]]> https://www.soliforum.com/post/11118/#p11118 satman49 wrote:

How are you doing the 3 D preview?

Just upload an STL it's automatic.

]]> Wed, 30 Jan 2013 19:57:26 +0000 https://www.soliforum.com/post/11118/#p11118 <![CDATA[Re: Air filter for SD2 or 3]]> https://www.soliforum.com/post/11115/#p11115 How are you doing the 3 D preview?

]]> Wed, 30 Jan 2013 19:39:13 +0000 https://www.soliforum.com/post/11115/#p11115 <![CDATA[Re: Air filter for SD2 or 3]]> https://www.soliforum.com/post/11113/#p11113 well i rethought the design some and madesome small changes to the file to include hose adapters to make this acomplet self contained unit so the air will recirculte and keep the heat in the unit i may make further changes for ease of printing and to save material

]]> Wed, 30 Jan 2013 19:31:47 +0000 https://www.soliforum.com/post/11113/#p11113 <![CDATA[Air filter for SD2 or 3]]> https://www.soliforum.com/post/11110/#p11110 this is designed to work with a charcoal inset filter i have not designed a spacific filter for this but i will later you will need an appropriate sized fan insert i have found there are usb adapters to run a 3-4 pin computer fan so i need one of those a fan of course and i will clarify my design later this is designed so i can attach a vent to the exterior of the case i may want to have 2 openings so that the heat is beign circuleted back into the case

so the hardware is a fan 4 screws and a charcoal filter

]]> Wed, 30 Jan 2013 19:13:38 +0000 https://www.soliforum.com/post/11110/#p11110