1 Topic by craigunderhill

  • craigunderhill
  • Member
  • Offline
  • Registered: 2015-11-02
  • Posts: 67

Topic: Anyone know if I can fix this?

Can I buy a replacement end for this?  I've looked all over the web and haven't found anything definitive.  One wire broke, and I have it just sort of taped into place for now.  Replacing the end would be easier than running all the wiring throughout the printer.

See attached image.  Thanks.

Post's attachments

IMG_0389.JPG
IMG_0389.JPG 1.71 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Anyone know if I can fix this?

craigunderhill wrote:

Can I buy a replacement end for this?  I've looked all over the web and haven't found anything definitive.  One wire broke, and I have it just sort of taped into place for now.  Replacing the end would be easier than running all the wiring throughout the printer.

See attached image.  Thanks.

Just look on ebay for stepper nema 17 stepper motors with harness and make sure they are the plug in type. Then you can just cut off the good one and splice it to your existing harness... or you can also get just a nema 17 harness as well on ebay.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by Landin81

  • Landin81
  • Landin81
  • Member
  • Offline
  • Registered: 2015-07-24
  • Posts: 66

Re: Anyone know if I can fix this?

Think this would work...

http://www.ebay.com/itm/10pcs-2-54mm-Fe … xyGstR9eE6

4 Reply by craigunderhill

  • craigunderhill
  • Member
  • Offline
  • Registered: 2015-11-02
  • Posts: 67

Re: Anyone know if I can fix this?

Thanks, guys! 

Landin81- Would I just crimp the wire that fell out and then stick it back in the harness?  What about the piece that is still in there?

Carl_m1968- Do you know the proper name of the plastic harness?  Maybe I could find just that on eBay.

Thanks again!

5 Reply by craigunderhill

  • craigunderhill
  • Member
  • Offline
  • Registered: 2015-11-02
  • Posts: 67

Re: Anyone know if I can fix this?

By the way.. this isn't coming from the stepper motor.  This is harness that plugs into the side of the extruder.  I think it's for the thermistor and heating element.