1 Topic by ianortiz956

  • ianortiz956
  • Member
  • Offline
  • Registered: 2015-05-17
  • Posts: 29

Topic: Referb Solidoodle 3 motherboard?

Hi i have bought  a referb solidoodle 3 and the hot end is junk i bought a e3d v6 lite, i want to do the firmware upgrade but i cant find out what motherboard i have.http://soliforum.com/i/?la2ifnu.jpg

2 Reply by jagowilson

  • jagowilson
  • PRINTiT
  • Offline
  • Registered: 2014-09-14
  • Posts: 1,701

Re: Referb Solidoodle 3 motherboard?

That's a Printrboard.

3 Reply by heartless

  • heartless
  • heartless
  • Member
  • Offline
  • From: Northcentral Wisconsin
  • Registered: 2015-04-08
  • Posts: 2,152

Re: Referb Solidoodle 3 motherboard?

this thread has info on how to update your firmware for the e3d

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

4 Reply by ianortiz956

  • ianortiz956
  • Member
  • Offline
  • Registered: 2015-05-17
  • Posts: 29

Re: Referb Solidoodle 3 motherboard?

Ok so looking though the upgrade i am going to select "Teensy ++2.0" when im on the audrino board meneu

5 Reply by heartless

  • heartless
  • heartless
  • Member
  • Offline
  • From: Northcentral Wisconsin
  • Registered: 2015-04-08
  • Posts: 2,152

Re: Referb Solidoodle 3 motherboard?

If that is what the directions say, then yes.

I havent actually done this one, so I am not positive. I bookmarked the thread for future reference as I do have an SD4 with that board that will eventually be upgraded to an E3D...just havent done it yet.

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

6 Reply by ianortiz956

  • ianortiz956
  • Member
  • Offline
  • Registered: 2015-05-17
  • Posts: 29

Re: Referb Solidoodle 3 motherboard?

Oh and i think the bootlaoder link is down

7 Reply by ianortiz956

  • ianortiz956
  • Member
  • Offline
  • Registered: 2015-05-17
  • Posts: 29

Re: Referb Solidoodle 3 motherboard?

Ok im having trouble in the command prompt its giving me
hid bootloader.... " is not recognized

8 Reply by grob (edited by grob 2015-10-02 03:20:30)

  • grob
  • grob
  • Member
  • Offline
  • From: Sydney, Australia
  • Registered: 2014-01-02
  • Posts: 900

Re: Referb Solidoodle 3 motherboard?

ianortiz956 wrote:

Ok im having trouble in the command prompt its giving me
hid bootloader.... " is not recognized

* What OS are you using? HID Bootloader program only works on windows AFAIK (others trying on OSX have got stuck in the same way)
* If you are on windows, have you navigated to the folder that the hid bootloader program is in (something like cd C:/wherever/you/put/it/) before running it (I think that's the step before in the instructions)?

SD3. Mk2b + glass, heated enclosure, GT2 belts, direct drive y shaft, linear bearings, bowden-feed E3D v5 w/ 0.9° stepper
Smoothieboard via Octoprint on RPi

9 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Referb Solidoodle 3 motherboard?

^That

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website