You are not logged in. Please login or register.
Hi guy's can some one help me I'm trying to print the MK5 for my solidoodle 2 for the E3D hotend and when i print it always got gaps and never looks right can some one please help with the settings of Slic3r or a file to load it to my printer or if is something better to slice it please let me know.
A picture is worth a thousand words.
You problem could be on the slicer side of things, more likely it's a mechanical/calibration issue.
Thank you i will check that
I've printed a lot of MK-5's and that is definitely not one. So many things can cause what's shown in the picture. Did it come loose from the bed? Did it skip steps because the extruder was bumping into the print?
None of which is related to the OP, help us help you.
I think my kid move the table, I'm printing something else right now when i finish i will post the picture. Thanks
Powered by PunBB, supported by Informer Technologies, Inc.
