https://www.soliforum.com/topic/12371/slic3r/ Mon, 28 Sep 2015 02:19:06 +0000 PunBB https://www.soliforum.com/post/106362/#p106362

]]> Mon, 28 Sep 2015 02:19:06 +0000 https://www.soliforum.com/post/106362/#p106362 https://www.soliforum.com/post/106359/#p106359 I think my kid move the table, I'm printing something else right now when i finish i will post the picture. Thanks

]]> Mon, 28 Sep 2015 02:01:43 +0000 https://www.soliforum.com/post/106359/#p106359 https://www.soliforum.com/post/106350/#p106350 I've printed a lot of MK-5's and that is definitely not one.  So many things can cause what's shown in the picture.  Did it come loose from the bed?  Did it skip steps because the extruder was bumping into the print?
None of which is related to the OP, help us help you.

]]> Sun, 27 Sep 2015 23:16:41 +0000 https://www.soliforum.com/post/106350/#p106350 https://www.soliforum.com/post/106341/#p106341

]]> Sun, 27 Sep 2015 21:26:56 +0000 https://www.soliforum.com/post/106341/#p106341 https://www.soliforum.com/post/106090/#p106090 Thank you i will check that

]]> Wed, 23 Sep 2015 19:16:09 +0000 https://www.soliforum.com/post/106090/#p106090 https://www.soliforum.com/post/106087/#p106087 A picture is worth a thousand words. 
You problem could be on the slicer side of things, more likely it's a mechanical/calibration issue.

]]> Wed, 23 Sep 2015 19:12:41 +0000 https://www.soliforum.com/post/106087/#p106087 https://www.soliforum.com/post/106083/#p106083 Hi guy's can some one help me I'm trying to print the MK5 for my solidoodle 2 for the E3D hotend and when i print it always got gaps and never looks right can some one please help with the settings of Slic3r or a file to load it to my printer or if is something better to slice it please let me know.

]]> Wed, 23 Sep 2015 19:01:57 +0000 https://www.soliforum.com/post/106083/#p106083