Topic: xyzprinting Da Vinci 2.0 A Duo Blue
Hi
I have a 2.0 A duo blue printer I want to use none xyz filament dose anyone no what filament counter resetter and firmware that will work on this print if any
Re: xyzprinting Da Vinci 2.0 A Duo Blue
You could use the XYZPro cartridge resetter. The only issue is the latest xyz ware and the firmware. Basically the latest firmware doesn't take the nozzle and bed temperature from the cartridge. Also the XYZ ware update connects to the internet. then if the cartridge is reset xyz can shut the cartridge down remotely. There was info about it over on http://www.wctek.com. It also has the info on all the firmware types. Hope it helps
Re: xyzprinting Da Vinci 2.0 A Duo Blue
Dose anyone no how to make a filament resetter I have a arduino board coming but I dont now if it will work has anyone made one for a da vinci2.0 a duo blue printer
Re: xyzprinting Da Vinci 2.0 A Duo Blue
I have a 2.0 gray with firmware 2.1.6 and a resetter. Everything works great. I only use cheaper filament. I probably reset my cartridges like twice a week.
- DopeSkrit
- Member
- Offline
Re: xyzprinting Da Vinci 2.0 A Duo Blue
jamesaw wrote:
Dose anyone no how to make a filament resetter I have a arduino board coming but I dont now if it will work has anyone made one for a da vinci2.0 a duo blue printer
Try https://www.youtube.com/watch?v=DrMEf4_v_Rc or reflash your printer with Repetier.
Da Vinci 1.0A Blue | Codename: FreeVinci | E3D v6 Bowden Custom Carriage | Printing PLA, ABS and PETG using S3D
Fabrikator Mini Orange | Printing PLA using Cura
Only printing with sub 20 Euro filaments.
Fabrikator Mini Orange | Printing PLA using Cura
Only printing with sub 20 Euro filaments.