26 Reply by jeff.whitney

  • jeff.whitney
  • Member
  • Offline
  • Registered: 2015-04-16
  • Posts: 14

Re: Has anyone put a smoothie board on a solidoodle?

Ramps and the Xteeg are similar then

27 Reply by heartless

  • heartless
  • heartless
  • Member
  • Offline
  • From: Northcentral Wisconsin
  • Registered: 2015-04-08
  • Posts: 2,152

Re: Has anyone put a smoothie board on a solidoodle?

they are both controller boards, yes, and do have some similarities, but they are a fair bit different in layouts...

a Ramps board...
https://reprapbook.appspot.com/images/RAMPS.jpg

and the Azteeg board...
http://cdn3.volusion.com/pgsmd.pvnjz/v/vspfiles/photos/AX33DP-2.jpg?1360544863

and just for comparison purposes...

Rumba...
http://www.robotronics.com.au/web/sites/default/files/styles/uc_product_full/public/RUMBA_1.jpg

Rambo...
https://ultimachine.com/sites/default/files/images/RAMBo_BirdEyeCutout.img_assist_custom-759x760.jpg

and Printrboard...
http://makemendel.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/d/r/driver202_3_2.jpg
(this is not the version Solidoodle uses however)

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

28 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Has anyone put a smoothie board on a solidoodle?

jeff.whitney wrote:

Ramps and the Xteeg are similar then


Ramps will not run on smoothie. Most common firmware for Ramps is Marlin or Repetier.

The only boards that will run on Smoothie firmware are these.

     Xpresso Smoothie
    mbed NXP LPC1768
    SmoothieBoard
    Smoothie On A Breadboard
    R2C2 RepRap Electronics
    Azteeg X5 mini
    AZSMZ Mini

Checkout this link for all the different firmwares and what boards support them...

http://reprap.org/wiki/List_of_Firmware

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.