You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Help/Repair/Maintenance → Vertical lines near corner
Hi guys,
recently I made my SD3 with some modifications
* lawsy's x,y carriages
* GT2 belt & pulley
and I found there are always vertical lines near 90 degree corners on both x and y sides,
it seems become "wave lines" for a while and then go straight , not sure how to fix it?
I'm sure the Y belts are equal tight and X belt is also tight and smooth
Its called ringing and is caused by oscillations in your system usually caused by printing too fast.
Hi carl,
Thanks, does it means my hotend wobbles on printing?
I consistently set the print speed to 50mm/s, is it too fast? or I should reduce acceleration of x,y moving?
Its called ringing and is caused by oscillations in your system usually caused by printing too fast.
It looks like a mechanical problem somewhere, like a vibration,
but I would first try different software, to determine if it is mechanical or software caused .
I found similar problem when I was using Makerbot-3.7 that was not there in Replicator-G,
It was only with one object file and only at starting point of layers tho.
I just read today that Wall-thickness setting in host software can cause a problem like that.
Don't understand how, but he said just changing that setting fixed it.
Did not say which software he was using.
SoliForum - 3D Printing Community → Help/Repair/Maintenance → Vertical lines near corner
Powered by PunBB, supported by Informer Technologies, Inc.
