Topic: display time remaining ?
hello,
it is possible to display the time remaining on the lcd of DaVinci 1.0?
if so how?
thank you
firmware repetier
davinci 1.0
firmware repetier
firmware repetier
- carl_m1968
- Member
- Offline
Re: display time remaining ?
Not with repetier firmware. It is displayed in the host however.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Re: display time remaining ?
OK thank you! print with its SD Card possible?
davinci 1.0
firmware repetier
firmware repetier
4 2015-06-26 21:03:10 (edited by Dominick 2015-06-26 21:03:27)
- Dominick
- Member
- Offline
Re: display time remaining ?
For me, if you are on windows it will display it on the printer's LCD, I have a dual boot so I mostly stay on Mac which does not.
Besides I'm not one who dwells on the time remaining. Start the print, make sure it's running good, then leave it.
Da Vinci 2.0 with Repetier Firmware (Printing in ABS/PLA/Exotics)
12 Years PC Experience
16 years old
12 Years PC Experience
16 years old
- carl_m1968
- Member
- Offline
Re: display time remaining ?
Just a note as well, the time remaining has an error rate of +/- 30 to 45 minutes as it is computed rather than tracked real time.
After checking, Repetier .92 should show time remaining but again that is estimated and is usually off by 20%.
I forgot I was running Marlin as I have converted to a RAMPS controller on my 1.0 so it was not showing time remaining nor do I really track it since it prints at night while I am asleep and when I am doing other things. When it gets done, it gets done.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Re: display time remaining ?
printing from Repetier host display printing progression / remaining time on printer LCD
printing from Simplify3D do not display printing progression / remaining time on printer LCD (at least until 2.22, no idea if 3.0 do it now)
printing from SD card display printing progression / remaining time on printer LCD