SoliForum - 3D Printing Community — E3Dv6 on Solidoodle Press

Re: E3Dv6 on Solidoodle Press

null@example.com (jayjayn) — Wed, 17 May 2017 23:57:31 +0000

for the people that did the non-bowden e3d v6 mod, what did you guys do about the Z-endstop?

Re: E3Dv6 on Solidoodle Press

null@example.com (jayjayn) — Fri, 05 May 2017 22:09:50 +0000

Just putting this back on the last post so if anybody like me needs help they can see this

also since the post is so old does anybody have pics of the mods the OP originally did?

MacGyverX wrote:

Okay. I am a done getting messages from folks who are not reading this thread.
So for the lazy.
"I got the E3D v6 and I plan on doing the Bowden Mod. Do I really need to update the firmware?"
Yes. You do.
"I want to do the firmware upgrade but I don't see any link to where it is or how to even do it, How are you expecting people to do this mod?"
1) http://www.soliforum.com/post/86023/#p86023
2) http://www.soliforum.com/post/86270/#p86270
"Dude, You don't even have the parts needed listed anywhere for this mod"
1) http://www.soliforum.com/post/83727/#p83727
2) http://www.soliforum.com/post/86023/#p86023
"I've never used the Arduino IDE or worked with a Arduino can you give me step-by-step instructions?"
Don't do the update.
"I printed your parts and nothing fits."
1) https://www.youtube.com/watch?v=Mbn1ckR86Z8
2) http://reprap.org/wiki/Calibration
"Github? I don't know how to use that. Why don't you use a normal place to post the parts?"
http://www.soliforum.com/post/86222/#p86222
"Why did you use the E3D v6 instead ?"
E3D > Everything.
"Why bowden? Direct would have been easier..."
Then design one. That fits in the same space without cutting in Z-
"You said you got Cyclops working with the press? Where are the mounts?"
Yea Sorry. I had a couple life events happen. I am back on the horse now. After I am done doing my gantry mod, I'll do a big push to github
"Can I mail you my press and you do the mod for me?"
No.
"Do you have any more info on the swanky Z-mod you did?"
http://www.soliforum.com/post/112969/#p112969
Sorry for the snotty answers but 100% of the most common questions I get asked are in this thread. Please read it. Or use the search box.

Re: E3Dv6 on Solidoodle Press

null@example.com (jayjayn) — Fri, 05 May 2017 21:39:52 +0000

thx!

Re: E3Dv6 on Solidoodle Press

null@example.com (elmoret) — Thu, 04 May 2017 17:41:38 +0000

STLs are on page 4.

https://github.com/ymilord/Solidoodle-Press-E3D-v6/

Re: E3Dv6 on Solidoodle Press

null@example.com (jayjayn) — Thu, 04 May 2017 06:36:52 +0000

Do I really have to go through all 21 pages to try to find the stl file or link?? also is there any working pics that show how it's installed? thanks!

Re: E3Dv6 on Solidoodle Press

null@example.com (sdiglesias) — Sat, 12 Mar 2016 17:39:44 +0000

seven2099 wrote:

sdiglesias wrote:
For the record, G29 works with SolidoodlePress_Shipped_FW_E3D_Ready but NOT with SolidoodlePress_Latest_FW_E3D_Ready
it absolutely does. I'm using it and G29 is part of my gcode in cura for all prints.
I've printed about a dozen items since building this upgrade using this firmware
The reason why it may not work is because your settings are gone and need to reset your settings to default. There's a gcode to do this.
This happened to me the first time I updated my fw through the HID bootloader

Ah, gotcha. Resetting the firmware defaults (M502) worked

Re: E3Dv6 on Solidoodle Press

null@example.com (seven2099) — Wed, 09 Mar 2016 23:12:42 +0000

sdiglesias wrote:

For the record, G29 works with SolidoodlePress_Shipped_FW_E3D_Ready but NOT with SolidoodlePress_Latest_FW_E3D_Ready

it absolutely does. I'm using it and G29 is part of my gcode in cura for all prints.

I've printed about a dozen items since building this upgrade using this firmware

The reason why it may not work is because your settings are gone and need to reset your settings to default. There's a gcode to do this.

This happened to me the first time I updated my fw through the HID bootloader

Re: E3Dv6 on Solidoodle Press

null@example.com (sdiglesias) — Tue, 08 Mar 2016 03:08:16 +0000

For the record, G29 works with SolidoodlePress_Shipped_FW_E3D_Ready but NOT with SolidoodlePress_Latest_FW_E3D_Ready

Re: E3Dv6 on Solidoodle Press

null@example.com (seven2099) — Fri, 26 Feb 2016 02:41:38 +0000

aaaand the first print looks amazing.

Re: E3Dv6 on Solidoodle Press

null@example.com (seven2099) — Fri, 26 Feb 2016 00:00:58 +0000

In any case guys, got everything up and running now. thanks for all the help. Temps seem to be reading fine..etc

Re: E3Dv6 on Solidoodle Press

null@example.com (elmoret) — Thu, 25 Feb 2016 22:00:36 +0000

gamera3 wrote:

seven2099 wrote:
gamera3 wrote:
My kit came with one 12v and 24v fans.
the 12 v fan wasnt even wroking and was getting hot
I changed it for a 24v fan and so far so good here
Your E3Dv6 kit came with 2 fans??
strange. Also, the 24v fan makes no sense really because you can't get more than 12volts out of the stock motherboard from the fan mounts.
Yeah they claimed to send me the wrong voltage fan, so they send me a 24v later.
Who knows what happened? maybe they sent me the right fan first, and the wrong one afterrwards? dunno

Where'd you buy it from?

Re: E3Dv6 on Solidoodle Press

null@example.com (StatusGruppe) — Thu, 25 Feb 2016 21:39:54 +0000

gamera3 wrote:

StatusGruppe wrote:
seven2099 wrote:
This is exactly what I'm saying...
The kit you get for the E3DV6 is 24volts including the fan (24v as well).
what did you do? the output is 12volts for the fan. Is there a work around for this? or do you have to solder the fan on to the board 24v input like someone else did on this thread?
Sorry I should have been more clear. We are using the Factory fan with this mount seen below.
Cool mod, how do you avoid the fan hitting the front part of the printer when g29 it's active?

I run the printer with Matter Control. It only probes in the middle of the bed.

Re: E3Dv6 on Solidoodle Press

null@example.com (gamera3) — Thu, 25 Feb 2016 03:25:38 +0000

StatusGruppe wrote:

seven2099 wrote:
StatusGruppe wrote:
The factory fan on the press is 12V.
This is exactly what I'm saying...
The kit you get for the E3DV6 is 24volts including the fan (24v as well).
what did you do? the output is 12volts for the fan. Is there a work around for this? or do you have to solder the fan on to the board 24v input like someone else did on this thread?
Sorry I should have been more clear. We are using the Factory fan with this mount seen below.

Cool mod, how do you avoid the fan hitting the front part of the printer when g29 it's active?

Re: E3Dv6 on Solidoodle Press

null@example.com (StatusGruppe) — Thu, 25 Feb 2016 02:04:33 +0000

seven2099 wrote:

StatusGruppe wrote:
seven2099 wrote:
Really? How did you manage with the fan though? isnt the fan that comes with the kit 24volt?
from reading this thread it seems the fan output is 12v on the motherboard.
The factory fan on the press is 12V.
This is exactly what I'm saying...
The kit you get for the E3DV6 is 24volts including the fan (24v as well).
what did you do? the output is 12volts for the fan. Is there a work around for this? or do you have to solder the fan on to the board 24v input like someone else did on this thread?

Sorry I should have been more clear. We are using the Factory fan with this mount seen below.

Re: E3Dv6 on Solidoodle Press

null@example.com (gamera3) — Wed, 24 Feb 2016 14:26:27 +0000

seven2099 wrote:

gamera3 wrote:
My kit came with one 12v and 24v fans.
the 12 v fan wasnt even wroking and was getting hot
I changed it for a 24v fan and so far so good here
Your E3Dv6 kit came with 2 fans??
strange. Also, the 24v fan makes no sense really because you can't get more than 12volts out of the stock motherboard from the fan mounts.

Yeah they claimed to send me the wrong voltage fan, so they send me a 24v later.
Who knows what happened? maybe they sent me the right fan first, and the wrong one afterrwards? dunno