You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Hacks & Mods → E3D extruder on a new SD3 FW HELP..
Hi,
I have a SD3 that i got on Juli 29 of this year,I just put the E3D extruder on , but now onto the FW this is were i need some help, on the E3Dwiki it is just to confusing for me or maybe i just missed something. I just want to do this right and not screw up my printer. can you help me??
Thanks for your time.
Gary
PS, i did a search and found nothing
You were unable to understand the setup guide from http://www.soliwiki.com/E3D_extruder ?
It's very easy to change.
Did you print the mk5 extruder mount before you attempt this?
Every thing is done, I just need help on the FW, yes i used the setup guide, but to me it was more for the SD2, maybe i missed something?, This is the part that im not sure about, It has follow the instuctions[1] LINK and there is nothing there??
" Printrboard firmware update process
If you have one of the more recent Solidoodles with the Printrboard, follow the instructions [1] for updating the firmware. Ignore the rest of this section except for the table of changes to the Configuration.h file below"
This link should help you out.
This link should help you out.
I will look at that and see..............
Thanks G
Every thing is done, I just need help on the FW, yes i used the setup guide, but to me it was more for the SD2, maybe i missed something?,
Actually, I have an SD3 and wrote that by describing my own process; I don't even know what adaptations are required to make those directions work for the SD2, if any.
If it's the firmware steps that are puzzling, I can only say, I agree. They're pretty much just a copy of someone else's instructions, and all I did was interleave steps. I wasn't able to find out enough about the firmware update process to make the directions more clear, and the folks who do understand the process, don't understand what's unclear about the directions.
G-unit wrote:Every thing is done, I just need help on the FW, yes i used the setup guide, but to me it was more for the SD2, maybe i missed something?,
Actually, I have an SD3 and wrote that by describing my own process; I don't even know what adaptations are required to make those directions work for the SD2, if any.
If it's the firmware steps that are puzzling, I can only say, I agree. They're pretty much just a copy of someone else's instructions, and all I did was interleave steps. I wasn't able to find out enough about the firmware update process to make the directions more clear, and the folks who do understand the process, don't understand what's unclear about the directions.
Hey HG,
Yes it is puzzling on the FW for me.. The guide on putting it together was AWESOME! Thank You..
what i meant was the part for the FW is more for the SD2 or the SD3 with older board is what i should of said.
Im going to try to get this figured out tonight I HOPE...
Thanks for your time.
G
All you have to do is adjust your max extruder temp and your sensor type if you use their thermistor that they provide.
If you need help with locating that I can help guide you however there is documentation all over the forum regarding this.
All you have to do is adjust your max extruder temp and your sensor type if you use there thermistor that they provide.
If you need help with locating that I can help guide you however there is documentation all over the forum regarding this.
Sounds easy ...
I am using the thermistor that came with it.
I will try this when i get home..
I wish there was a video on this??
Thanks for your time.
G
What do you think people did before Youtube? 
What do you think people did before Youtube?
Went to the library ;-)
What do you think people did before Youtube?
Watched their own cats... not as diverse, but still amusing 
elmoret wrote:What do you think people did before Youtube?
Watched their own cats... not as diverse, but still amusing
Especially with the advent of laser pointers
OK,
i went in and changed what i needed to change in "configuration.H" and when i hit compile .this is what i get.
what did i do wrong??
Did you change the comport by accident in marlin?
Did you change the comport by accident in marlin?
No i left it at 0 .
Should i have changed that to the comport my printer is on "com13" , ?
Thanks G
Hmm
Can you post your code?
I am at work, so i cant until tonight.
any update on this? im having the exact same problem...
any update on this? im having the exact same problem...
Hey Jake,
No not for me, I got sick with the Flu so i haven't messed with it, but every one seems to think it is easy to do, but no one has shown how to do it. I'm sure once we do it it will be easy .
If you figure it out will you please help me?
Thanks G
will do. still searching... i hate having this thing offline for so long. 
if anyone can help here is my error:
In file included from /Marlin.h:26,
from cardreader.cpp:1:
/pins.h:573:2: error: #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
In file included from /Marlin.h:38,
from cardreader.cpp:1:
/MarlinSerial.h: In member function 'int MarlinSerial::available()':
MarlinSerial.h:65: error: 'rx_buffer' was not declared in this scope
/MarlinSerial.h: In member function 'void MarlinSerial::write(uint8_t)':
MarlinSerial.h:70: error: 'UCSR0A' was not declared in this scope
MarlinSerial.h:70: error: 'UDRE0' was not declared in this scope
MarlinSerial.h:73: error: 'UDR0' was not declared in this scope
/MarlinSerial.h: In member function 'void MarlinSerial::checkRx()':
MarlinSerial.h:79: error: 'UCSR0A' was not declared in this scope
MarlinSerial.h:79: error: 'RXC0' was not declared in this scope
MarlinSerial.h:80: error: 'UDR0' was not declared in this scope
MarlinSerial.h:81: error: 'rx_buffer' was not declared in this scope
the .pde files i have tried are:
______________________________________
http://www.solidoodle.com/wp-content/up … __SD3_.zip
https://github.com/mlaws/solidoodle2-marlin
https://github.com/mlaws/solidoodle2-ma … /Marlin_v1
____________________________________________
I seem to get the same error with all versions.
the latest instructions i can find are located at http://wiki.solidoodle.com/update-firmware , but i have followed the directions at http://www.soliwiki.com/Updating_Solidoodle_Firmware too.
will do. still searching... i hate having this thing offline for so long.
Im just using mine with the stock FW, its working ok, would like to get some more temp but it works for now.
What board are u picking in Arduino? what version of Arduino u using?
SoliForum - 3D Printing Community → Hacks & Mods → E3D extruder on a new SD3 FW HELP..
Powered by PunBB, supported by Informer Technologies, Inc.
