1 Topic by juliaragno

  • juliaragno
  • Newbie
  • Offline
  • Registered: 2020-04-06
  • Posts: 8

Topic: Replacing the Power Supply

So I’m trying to replace my power supply with the SolidGear pc power supply. It’s the same size except the wires are different. Does anyone know how to splice the wires to make it work?

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Replacing the Power Supply

Look up ATX connector pin out. It will tell you what the wire colors are. The switch is wired on power off/on line.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by juliaragno

  • juliaragno
  • Newbie
  • Offline
  • Registered: 2020-04-06
  • Posts: 8

Re: Replacing the Power Supply

carl_m1968 wrote:

Look up ATX connector pin out. It will tell you what the wire colors are. The switch is wired on power off/on line.

So I got it to sense the x and y axis. However it’s not heating up. Which wires correlate with that ?