Topic: Replacing the Power Supply
So I’m trying to replace my power supply with the SolidGear pc power supply. It’s the same size except the wires are different. Does anyone know how to splice the wires to make it work?
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Help/Repair/Maintenance → Replacing the Power Supply
So I’m trying to replace my power supply with the SolidGear pc power supply. It’s the same size except the wires are different. Does anyone know how to splice the wires to make it work?
Look up ATX connector pin out. It will tell you what the wire colors are. The switch is wired on power off/on line.
Look up ATX connector pin out. It will tell you what the wire colors are. The switch is wired on power off/on line.
So I got it to sense the x and y axis. However it’s not heating up. Which wires correlate with that ?
SoliForum - 3D Printing Community → Help/Repair/Maintenance → Replacing the Power Supply
Powered by PunBB, supported by Informer Technologies, Inc.