Topic: Issues with construction of Filastruder
I recently received my new Filastruder, and have got it mostly put together. However, I've had several issues with the tolerances. The first was that one of the holes on the pipe flange was too small, and while trying to get the bolt through, it squashed the threading. This means that the extrusion barrel is mounted with only 3 bolts. As well as this, the acrylic case doesn't line up properly, making it very difficult for me to put the bolts through to secure the acrylic plates in place. This is likely a result of the barrel mounting issue. While these issues did give me considerably trouble for a while, I've managed to remedy them for the most part. Any assistance would be welcome