Dears,
Problem solved. As requested, I attach the stl file.
The issue was not the printer or the software. It was the object itself.
As proposed in the replies, I downloaded and installed RH. And when I opened the file with RH, a message was displayed mentionning that the object was broken and that I should visit "https://tools3d.azurewebsites.net/" to fix it.
I did it, I receive a .3mf file and I tried to installed it with RH. But another problem come from RH. Every time a new layer was done, it pull and then push back the filament. My solidoodle 3 is "old" (bough in 2013) and the extruder does not support it for a long time: after a couple of minutes, the filament did not followed the back and forth. The extruder did not push the plastic on the bed anymore.
So, I finally find a solution to convert a .3mf file to a .stl file and I use SoliPrint again. Now, everything is working.
If I summarize the complete workload:
1. I open RH and open the .stl file. If I do not see any warning message, I go to the point 4. Otherwise, I continue to the second step.
2. I repair the file and receive back a .3mf
3. I convert the .3mf to a stl
4. I print the file
Post's attachmentsShuttleOrbiterAft.stl 439.27 kb, 9 downloads since 2018-11-17
You don't have the permssions to download the attachments of this post.