1 Topic by PorkyTheChop

  • PorkyTheChop
  • Newbie
  • Offline
  • Registered: 2017-12-17
  • Posts: 1

Topic: Da Vinci Mini Error 0031

Does anyone know how to fix error code 0031 on da Vinci Mini W?

2 Reply by yizhou.he

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,322

Re: Da Vinci Mini Error 0031

Check that the Y-axis motor is connected, then check that the Y-axis sensor is in the right position and the connector is plugged in.

This is usually caused by wire harness issue, either plug for y-axis motor/Y-axis endstop is loose or broken wire.

Check the wire for y-axis motor/Y-axis endstop with multimeter if possible.

Switch with x-axis motor/Y-axis endstop wire if you don't have multimeter. If it is the wire, your error code will change to 0030.

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1